The QNAM may continue to outlive both.
Rename Credentials::getQNAM() to createQNAM() while we're at it - it's
used to make a new QNAM that will subsequently be owned by the Account
object.
See d01065b9a1 for rationale.
Relates to
d40c56eda5147cf798a6
* SocketAPI has COPL_LOCAL_LINK / EMAIL_LOCAL_LINK commands
* The nautilus and dolphing shell integrations show a submenu from which
one can share as well as access the private link.
* The SocketAPI provides a new GET_STRINGS command to access localized
strings.
* The private link can also be accessed from the user/group sharing
dialog.
* The numeric file id is extracted from the full id to create the
private link url.
There was a rounding issue in the mtimes which sometimes resulted in an
off-by-one error. Caused by storing a full QDateTime in the FileInfo but
the mtime saved to the disk being truncated to seconds.
* For conflicts where mtime and size are identical:
a) If there's no remote checksum, skip (unchanged)
b) If there's a remote checksum that's a useful hash, create a
PropagateDownload job and compute the local hash. If the hashes
are identical, don't download the file and just update metadata.
* Avoid exposing the existence of checksumTypeId beyond the database
layer. This makes handling checksums easier in general because they
can usually be treated as a single blob.
This change was prompted by the difficulty of producing file_stat_t
entries uniformly from PROPFINDs and the database.
This is useful for monitoring what kind of network requests are
sent to the fake server. Such as "did this sync cause an upload?"
and "was there a propfind for this path?". It can also inject
custom replies.
The client is very picky about date strings it accepts. If dates are
formatted with a non-C locale (such as localized weekday names), it
fails to parse it and tests fail in subtle ways.
Issue #5783
When the directry that should be removed by selective sync contains changes,
we ignore the whole sub tree instead of only ignoreing new files.
We cannot ignore the whole directory, we need to ignore only the directory
that do not have files to remove
When a new folder becomes selective-sync excluded, we already mark it
and all its parent folders with _invalid_ etags to force rediscovery.
That's not enough however. Later calls to csync_statedb_get_below_path
could still pull data about the excluded files into the remote tree.
That lead to incorrect behavior, such as uploads happening for folders
that had been explicitly excluded from sync.
To fix the problem, statedb_get_below_path is adjusted to not read the
data about excluded folders from the database.
Currently we can't wipe this data from the database outright because we
need it to determine whether the files in the excluded folder can be
wiped away or not.
See owncloud/enterprise#1965
* For requests:
- reuse the original QNetworkRequest, so headers and attributes
are the same as in the original request
- determine the original http method from the reply and the request
attributes
- keep the original request body around such that it can be sent
again in case the request is redirected
* Simplify the interface that is used for creating new requests in
AbstractNetworkJob.
It could be possible that _firstJob is marked as finished if
aborted before its parent PropagateDirectory was marked as finished,
allowing a posted scheduleNextJob call to schedule the child job
in-between.
We were removing the wholme journal db when the user wanted to keep all files,
But that would also remove the selective sync lists.
We should only remove the metadata table.
Issue #5484
- Put all tests in the bin directory so that DLLs can be loaded
- Add missing exports
- Skip tests that use code depending on zlib
- The "GMT" timezone is named differently, use the int constructor instead
5 tests are still failing, it's not really worth fixing at the moment
since no developper is currently using Windows as its main platform.
On macOS /var is a symlink to /private/var and we have to make sure that we
use the canonical path before and after it enters the code to make sure we
compare paths correctly.
- We need to use a QGuiApplication on macOS or else we don't get notifications
- Switch to use QSignalSpy rather than lists and sleeps
- Use system() for all modifications since we pass kFSEventStreamCreateFlagIgnoreSelf
- Keep using the local process on Windows since it catches its own events
It could be possible that _firstJob is marked as finished if
aborted before its parent PropagateDirectory was marked as finished,
allowing a posted scheduleNextJob call to schedule the child job
in-between.
This was to catch duplicate emissions for PropagateDirectory but we
don't emit this signal anymore from there.
This fixes a warning about PropagatorJob not being a registered metatype.
This reverts commit fe42c1a818.
Stale chunks might be there because a file was removed or would just not
be uploaded, for any reason.
We just start the DeleteJob but we don't care if it success or not.
Relates to https://github.com/owncloud/core/issues/26981
One of the test is testing the case where the file is modified on the server
during the upload. So this test the precondition failed error.
The FakeGetReply logic was modified because resizing a 150MB big QByteArray
by increment of 16k just did not scale when downloading a big file.
Relates to https://github.com/owncloud/core/issues/26981
We do not track the success or error of the DeleteJob because it does not
matter. If it fails, it might be because the chunks were already removed.
If not, the chunks will be stale, but the server must anyway do a few
cleanup from time to time because we do not always remove the chunks
The current logic tried to avoid a DB lookup just to fetch whether
the file is shared or not since that info is already in the
SyncFileItem. The implementation would however need to decrease the
sync count for itself (and parents) before emitting the new status,
thus emitting the OK status for parents before that last child that
ended the propagation for that folder.
Change the implementation to achieve what we want: give the
possibility to decSyncCount to use a pre-fetched sharing state while
still doing the emission for all involved files. This ensures that
the leaf file also gets its status emitted before its parents.
Issue #4797
Shrinks owncloud binary by 24 KB and libowncloudsync by 14 KB.
I don't know if it has influence on memory usage or runtime speed though.
Was worth a try.
Previously this wasn't happening for errors that were not
NormalErrors because they don't end up in the blacklist.
This revises the resetting logic to be independent of the
error blacklist and make use of UploadInfo::errorCount
instead.
412 errors should reset chunked uploads because they might be
indicative of a checksum error.
Additionally, server bugs might require that additional
errors cause an upload reset. To allow that, a new capability
is added that can be used to advise the client about this.
We are going to change the webdav path depending on the capabilities.
But the SyncEngine and csync might have been created before the capabilities
are retrieved.
The main raison why we gave the path to the sync engine was to pass it to csync.
But the thing is that csync don't need anymore this url as everything is done by the
discovery classes in libsync that use the network jobs that use the account for the urls.
So csync do not need the remote URI.
shortenFilename in folderstatusmodel.cpp was useless because the string is the
_file of a SyncFileItem which is the relative file name, that name never
starts with owncloud://.
All the csync test creates the folder because csync use to check if the folder
exists. But we don't need to do that anymore
The "S" in the permission is only for the "Shared with me" files.
It is only used to show the shared status in the overlay icons.
But we also wish to show the shared status for files that are shared
"by" the users. We can find that out using the 'share-types' webdav
property. If set, then we are sharing the object.
We fake a 'S' in the permission as for our purpose, they mean the same.
Issue #4788
As the file can be some hunreds of megabytes, allocating such big arrays may
cause problems.
Also make the timeout a bit bigger so the test can rununder valgrind.
Update from commit 05ce8a23cdc12e825532dc6de06c267fb8d48b4f from
https://github.com/dragotin/QProgressIndicator
Which itself is forked from commit e5ba0fd09bfd43b067ee3646d70b294c7efcb558 from
upstream, with additional license header.
It was relicensed to MIT according to
14bb9d10e2
Relates to issues #5180 and #5184
Issue #5224
Two problems:
- In the discovery phase, we need to check the selective sync entries of
the source path in case of renames.
- When the rename is done, we need to actually update the black list in the
database.
Two bugs:
- The change filed are not considered as move, they are re-downloaded
but the old file was not removed from the database. The change in
owncloudpropagator.cpp takes care of removing the old entries.
- Next sync would then remove the file in the server in the old folder
This was not a problem until we start reusing the sync engine, and
that the _renamedFolders map is not cleared. We were before deleting
a non-existing file. But now we delete the actual file.
Also improve the tests to be able to do move on the server.
This include support for file id.
Issue #5192
This would happen if the directory would first need to be created
through an mkdir propagation job. This job's itemCompleted signal
would trigger the directory to show as SYNC even though its children
are still propagating.
Fix the issue by tracking the sync count for each file, affecting
its parents. This allows us to get rid of the O(n) vector lookup
for each status query, and properly track the hierachical sync
status of a directory.
This also removes the itemCompleted signal emission from the
PropagateDirectory job. Since we only needed for overlay icons, and
since this job doesn't do any direct propagation, we can remove it
to ensure that we won't call itemCompleted twice for the item attached
to Propagate*Mkdir jobs (since the PropagateDirectory is backed by
the same SyncFileItem, instruction and status).
Add a missing call that we currently only do in slotItemCompleted.
This would normally only affect the first sync and would have
gotten properly update at the end of the sync anyway.
To be able to test the SyncEngine efficiently, a set of server
mocking classes have been implemented on top of QNetworkAccessManager.
The local disk side hasn't been mocked since this would require adding
a large abstraction layer in csync. The SyncEngine is instead pointed
to a different temporary dir in each test and we test by interacting
with files in this directory instead.
The FakeFolder object wraps the SyncEngine with those abstractions
and allow controlling the local files, and the fake remote state
through the FileModifier interface, using a FileInfo tree structure
for the remote-side implementation as well as feeding and comparing
the states on both side in tests.
Tests run fast and require no setup to be run, but each server feature
that we want to test on the client side needs to be implemented in
this fake objects library. For example, the OC-FileId header isn't
set as of this commit, and we can't test the file move logic properly
without implementing it first.
The TestSyncFileStatusTracker tests already contain a few QEXPECT_FAIL
for what I esteem being issues that need to be fixed in order to catch
up on our test coverage without making this patch too huge.
When a conflict-rename or a temporary-rename fails, notify the
LockWatcher. It'll regularly check whether the file has become
accesible again. When it has, another sync is triggered.
owncloud/enterprise#1288
Remove all configure_files:
- Move all tests to cpp files
- Use the QTEST_MAIN macro instead of a generated main.cpp
- Include test*.moc in the cpp to let CMAKE_AUTOMOC call moc
- Pass info through add_definitions instead of generating oc_bin.h with them
This makes sure that build errors points to the original test source
file instead of the generated one in the build directory to be able to
jump and fix errors directly from the IDE's error pane.
