- Add category to the all messages (they did not have it was merged right after
the patch to add category everywhere, but this code did not have it.)
- Make sure there is no warnings in the normal flow. (The wizard does a request
without authentication to determine the auth type)
All our crypto code is handled by qt nodaways.
No need to carry this dependency.
Especially since it causes warnings on system where there are
twp openssl version installed:
/usr/bin/ld: warning: libcrypto.so.1.0.0, needed by /usr/lib/libQt5Network.so.5.9.0, may conflict with libcrypto.so.1.1
Issue #5783
When the directry that should be removed by selective sync contains changes,
we ignore the whole sub tree instead of only ignoreing new files.
We cannot ignore the whole directory, we need to ignore only the directory
that do not have files to remove
See owncloud/enterprise#1966
If the server and the client's database go out of sync, there could be
persistent 404 errors. This change ensures that the problem corrects
itself eventually by triggering a remote discovery of the file's
parent folders.
It does not address the root cause that might have lead to the
divergence.
Older ownCloud servers like 8.2.0 used to use integer ids.
This broke when switching to QJson because toString() on JSON
values is strict and returns "" for integers.
This should help clearly delimiting them in the log for multi-account setups.
This information is already available elsewhere in the log in any case.
Issue #5672
These would otherwise be line-wrapped by clang-format,
and then consecutive reformattings remove the aligned
comment indentation
Example:
int a; // too long comment
->
int a; // too long
// comment
->
int a; // too long
// comment
When a new folder becomes selective-sync excluded, we already mark it
and all its parent folders with _invalid_ etags to force rediscovery.
That's not enough however. Later calls to csync_statedb_get_below_path
could still pull data about the excluded files into the remote tree.
That lead to incorrect behavior, such as uploads happening for folders
that had been explicitly excluded from sync.
To fix the problem, statedb_get_below_path is adjusted to not read the
data about excluded folders from the database.
Currently we can't wipe this data from the database outright because we
need it to determine whether the files in the excluded folder can be
wiped away or not.
See owncloud/enterprise#1965
Use qCInfo for anything that has general value for support and
development. Use qCWarning for any recoverable error and qCCritical
for anything that could result in data loss or would identify a serious
issue with the code.
Issue #5647
This gives more insight about the logs and allow setting fine-tuned
logging rules. The categories are set to only output Info by default
so this allows us to provide more concise logging while keeping the
ability to extract more information for a specific category when
developping or debugging customer issues.
Issue #5647
Add the log level and category name in the output. Only output the
thread ID and function name for qCDebug statements as they are not
necessary for general use and make the log harder to read.
Also make sure that the message pattern is set when NO_MSG_HANDLER is
used. Using an environment variable should have priority over it anyway.
When we first detect a 503 (probably from a PROPFIND) and enter the
ServiceUnavailable state, we new trigger a status.php query that will
switch the state to MaintenanceMode if necessary.
Before this patch, to deep folder would just be ignored, without any feedback.
This patch makes it so deep folder are properly shown as ignored in the UI.
Also increase the MAX_DEPTH
Issue: #1067
I'm confident this is unnecessary. The original bug in #3283 was
to call ignoreSslErrors() without an argument in the 'accept'
case, which meant ignoring *all* subsequent SSL errors.
With that fixed, explicitly aborting the reply and resetting QNAM
is not needed since not ignoring the error will lead to the SSL
handshake failing.
See also:
75b38d1a2f (workaround introduced)
89376e14d6 (real fix)
76ce5adbf0 (cherry-pick of workaround)
* Allow creating nameless shares
* Display token as name for nameless shares
(both to be consistent with server)
* Allow changing a share's name by editing it in the table
* Minor adjustments
Starting from oC 10.0.0 having several public link shares with
different attributes for a path will be supported. This adds
functionality to create, edit and delete these public link shares.
The behavior is currently gated by server version, but should be
adapted to use a capability as soon as one is introduced, see
owncloud/core#27622.
The UI reduces to a single-share version when talking to older servers.
Testing scenarios:
* Link sharing is disabled (by capability, not by theme)
* Required passwords
* Required expiry
* Forbidden 'allow upload' for folders
* New and old servers
Newer servers will have the option of hiding version, versionstring, edition
and productname. They will always send the full information in the capabilities.
By default QNetworkReply::errorString() often produces messages like
"Error downloading <url> - server replied: <reason>"
but the "downloading" part invariably confuses people since the
error might very well have been produced by a PUT request.
This commit produces clearer error messages for HTTP errors.
Additionally:
* Remove some unnecessary null checks from slots connected to
network job signals and document that these signals never send
null replies.
* There was a bug where AbstractNetworkJob::_timedout wasn't
set when derived classes overrode slotTimeout. We now ensure
it's always set by disallowing overrides of slotTimeout.
Instead it now calls onTimedOut, which allows custom handling.
* Several subclasses declared errorString, isTimedOut. Move
these to AbstractNetworkJob.
* Unify handling of OC-ErrorString (via the new, general
Job::errorString)
* Add documentation in various places.
Before we would only open the part of the url that the users entered.
Now if the wizardUrlPostfix is used this is should be appended to that
when opening the browser on the result page.
Backtrace looks like this:
Crash: EXCEPTION_ACCESS_VIOLATION_READ at 0x0
File "propagatedownload.cpp", line 234, in OCC::GETFileJob::slotReadyRead
File "moc_propagatedownl_CA5CFSHZDTX34X.cpp", line 86, in OCC::GETFileJob::qt_static_metacall
File "qobject.cpp", line 495, in QMetaCallEvent::placeMetaCall
File "qobject.cpp", line 1256, in QObject::event
File "qapplication.cpp", line 3804, in QApplicationPrivate::notify_helper
GETFileJob::slotReadyRead can be called with a QueuedConnection when the
bendwith manager is involved. In that case, if the QNAM was reset
in between, the reply might have been destroyed.
(This is only speculation based on the backtrace)
Backtrace from the crash reporter:
Crash: EXCEPTION_ACCESS_VIOLATION_READ at 0x21
File "qcoreapplication.cpp", line 1281, in QCoreApplication::postEvent
File "qobject.cpp", line 2125, in QObject::deleteLater
File "connectionvalidator.cpp", line 240, in OCC::ConnectionValidator::reportResult
File "connectionvalidator.cpp", line 206, in OCC::ConnectionValidator::slotAuthFailed
File "moc_connectionvalidator.cpp", line 127, in OCC::ConnectionValidator::qt_static_metacall
File "qobject.cpp", line 3716, in QMetaObject::activate
File "moc_networkjobs.cpp", line 653, in OCC::PropfindJob::finishedWithError
File "networkjobs.cpp", line 570, in OCC::PropfindJob::finished
I believe the problem is caused because 'this' was deleted in ConnectionValidator::reportResult
as the signal connectionResult gets emited. The AccountState::slotConnectionValidatorResult
slot does indeed call slotInvalidCredentials which might call {Shibboleth,Http}Credentials::fetchFromKeychain
which might emit fetched directly, which will call AccountState::slotCredentialsFetched
which deletes the _connectionValidator
So use deleteLater when deleting the _connectionValidator, hoping this helps
* make target duration a client option instead of a capability
* simplify algorithm for determining chunk size significantly
* preserve chunk size for the whole propagation, not just per upload
* move options to SyncOptions to avoid depending on ConfigFile
in the propagator
* move chunk-size adjustment to after a chunk finishes, not when
a new chunk starts
Previously the check box was checked if *any* of its sub-permissions
were granted. This can hide the fact that only a limited subset of them
are actually granted.
The new behavior is to display as "partially checked" if only some
of the sub-permissions are available. Clicking the check box itself
still toggles between granting all or none of them.
When there is no errors _syncResult.firstItemError() is NULL, and accessing
it's _file member is an undefined behavior. (Thankfully, createGuiLog did not
use the string when the count was 0, but we are not supposed to create
null references.
Found with the UB sanitizer:
src/gui/folder.cpp:348:49: runtime error: member access within null pointer of type 'OCC::SyncFileItem'
src/gui/folder.cpp:348:19: runtime error: reference binding to null pointer of type 'const QString'
The backtrace seems to indicate that the account is invalid.
I don't know how this can happen, maybe the account's display
name was changed while the app is running?
Backtrace:
Crash: EXC_BAD_ACCESS / KERN_INVALID_ADDRESS at 0x18
Module "owncloud", in OCC::AccountState::account
Module "owncloud", in OCC::ActivityListModel::data
Module "owncloud", in OCC::ActivityItemDelegate::paint
Module "QtWidgets", in QListView::paintEvent
Module "QtWidgets", in QWidget::event
Module "QtWidgets", in QFrame::event
Module "QtWidgets", in QAbstractScrollArea::viewportEvent
Module "QtWidgets", in QAbstractItemView::viewportEvent
Module "QtWidgets", in QAbstractScrollAreaFilter::eventFilter
Module "QtCore", in QCoreApplicationPrivate::sendThroughObjectEventFilters
The destructor of the PropagateItemJob will access the propagator's
_activeJobList. So the _rootJob needs to be destroyed before it.
Order of destruction is the reverse of the order of the members in
the class. So put it at the end so it can be destroyed first.
(This made TestSyncEngine::testDirDownloadWithError crash sometimes
in the master branch)
I didn't want to touch this visible translated string in a
patch release so I just switched the data.
For Qt versions before 5, we continue to show the build-time version
of OpenSSL but it's clearly marked as such.
In 8ef11a38c9, we started blacklisting
SoftError for 0 seconds. But if the two sync happen with less than
1s interval, we would still prevent them to happen.
So make sure we expire if 0 seconds have expired
The backtrace looks like:
File "atomic_base.h", line 396, in QString::~QString
File "qlist.h", line 442, in OCC::FolderStatusModel::slotUpdateDirectories
This is the only QList operation, and it may crash if the list is empty.
It can be empty if the propfind returned empty results.
I'm not sure how this can be possible to have an empty list there since
the server is always supposed to return at least one entry, for the directory
itself. But it can happen if a directory was transformed in a file, or
if there is a bug on the server.
This is a possible fix for #3850, applying custom window flags (http://doc.qt.io/qt-5.8/qt.html#WindowType-enum) on the connection method dialog. These avoid resizing the dialog and displaying a maximize button on OS X and context help button on Windows.
It is possible to create files with filenames that differ
only by case in NTFS, but most operations such as stat and
open only target one of these by default.
When that happens, we want to avoid uploading incorrect data
and give up on the file.
Typically this situation should never occurr during normal use
of Windows. It can happen, however, when a NTFS partition is
mounted in another OS.
So the title of the column is fully visible.
Adjust the default size and the size policy of the label so it behave
correctly as the window get resized
Issue #5600
The crash reporter shows many crashes in OwncloudPropagator::scheduleNextJob.
We don't really know what could be the cause, but it's probably because
the _activeJobList contains dangling pointer.
So this patch makes sure to remove all the jobs from this list as they get
destroyed.
* For requests:
- reuse the original QNetworkRequest, so headers and attributes
are the same as in the original request
- determine the original http method from the reply and the request
attributes
- keep the original request body around such that it can be sent
again in case the request is redirected
* Simplify the interface that is used for creating new requests in
AbstractNetworkJob.
Backtrace from the crash reporter:
Crash: EXCEPTION_ACCESS_VIOLATION_READ at 0x401
File "moc_activitylistmo_M5OEXJ7XGJYTWT.cpp", line 92, in OCC::ActivityListModel::qt_static_metacall
File "qobject.cpp", line 3730, in QMetaObject::activate
File "moc_networkjobs_7AMNCW4BBANVRK.cpp", line 1342, in OCC::JsonApiJob::jsonReceived
File "networkjobs.cpp", line 714, in OCC::JsonApiJob::finished
File "abstractnetworkjob.cpp", line 207, in OCC::AbstractNetworkJob::slotFinished
File "moc_abstractnetwor_PFI2TXGQHRE33H.cpp", line 98, in OCC::AbstractNetworkJob::qt_static_metacall
File "qobject.cpp", line 3730, in QMetaObject::activate
File "moc_qnetworkreply.cpp", line 367, in QNetworkReply::finished
File "qnetworkreplyhttpimpl.cpp", line 2100, in QNetworkReplyHttpImplPrivate::finished
File "qnetworkreplyhttpimpl.cpp", line 279, in QNetworkReplyHttpImpl::abort
My theory is that the AccountState stored in a property of the job was destroyed.
before the job timed out.
Therefore, the qobject_cast within the qvariant_cast would call the metaObject()
virtual function on a dangling pointer.
Fix it by storing a QPointer instead which will track the deletion.
This leads to crashes since we changed the connection to the parent
jobs not to be queued anymore.
We don't really need to bubble up the finished state through
parents in that case, and it would also mean that we'd recurse
all the way through leaves as we go up to each parent. So just call
abort directly on the OwncloudPropagator and make sure the abortion
call is posted to the event loop.
Avoid using connections to report up the job tree for signals
that we can directly communicate to the OwncloudPropagator.
This slightly reduces the memory usage and avoid passing those calls
through the whole parent chain.
In preparation for the PropagateDirectory refactoring, simplify things
by removing WaitForFinishedInParentDirectory, which is currently
implemented as a one-level check.
This value is important for directory items, but is however never
used since a directory CSYNC_INSTRUCTION_RENAME item will always be in
PropagateDirectory::_firstJob, which will have to pass through its own
PropagateDirectory job's parallelism() before reaching the parent's
_subJobs optimization.
Since PropagateDirectory::parallelism can only return WaitForFinished
or FullParallelism, that value is lost. So this commit doesn't
change the behavior for directories, and allow file renames to be
scheduled in parallel across directories (which isn't a problem).
It could be possible that _firstJob is marked as finished if
aborted before its parent PropagateDirectory was marked as finished,
allowing a posted scheduleNextJob call to schedule the child job
in-between.
- I checked every occurence of a '%2' and make correct use of the
QString::arg overload that takes several argument instead of chaining
them, because the first argument can contains a '%1'
- I tried to look for every label that they either use plain text or richtext
and escape the user provided strings in there.
By default, followRedirects is true for all requests, to transparently
handle redirections. In the wizard, we have special redirect-handling
code though and that was being skipped.
Setting the flag to false allows the wizard to be aware of redirects
and to handle them in the correct way. Tested with the server described
in
https://github.com/owncloud/administration/tree/master/redirectServer
There's a second bug here, where followRedirects always converts
redirected requests to the GET verb. That means redirected PROPFINDs
will never have worked. This change un-breaks them for the wizard only.
There should be no case that previously worked that stops working now.
The test sets OWNCLOUD_MAX_PARALLEL to 1 to disable parallelism.
But since the max amount of parallelism is twice as much, that does not
work.
So change the way we compute the hardMaximumActiveJob: Use the value of
OWNCLOUD_MAX_PARALLEL to maximize this amount and base the maximum amount
of transfer jobs on it instead of the other way.
A result of this change is that, in case of bandwidth limit, we keep the
default of 6 non-transfer jobs in parallel. I believe that's fine since
the short jobs do not really use bandwidth, so we can still keep the same
amount of small jobs.
This reverts commit e1f5a49c21.
Retrying uploads with insufficent storage errors frequently leads to
high server traffic. See #5537 for links and a sketch of a correct
solution.
If we call
setConfiguration(QNetworkConfiguration());
This sets an invalid configuration on the QNAM.
But later, when we really go online because interfaces are discovered,
QNetworkAccessManagerPrivate::_q_onlineStateChanged is called (with isOnline=true).
And this will set the state to disconnected because customNetworkConfiguration is
true, and the networkConfiguration state is disabled.
The workaround we to fix another bug on Windows in which the default network
configuration was not behaving properly.
The issue on linux is hard to reproduce and only happen in some condition,
but it was reproduced on smashbox when they run two owncloudcmd at the same time.
Issues: #4720 , #3600
We were removing the wholme journal db when the user wanted to keep all files,
But that would also remove the selective sync lists.
We should only remove the metadata table.
Issue #5484
- Put all tests in the bin directory so that DLLs can be loaded
- Add missing exports
- Skip tests that use code depending on zlib
- The "GMT" timezone is named differently, use the int constructor instead
5 tests are still failing, it's not really worth fixing at the moment
since no developper is currently using Windows as its main platform.
It could be possible that _firstJob is marked as finished if
aborted before its parent PropagateDirectory was marked as finished,
allowing a posted scheduleNextJob call to schedule the child job
in-between.
