This allows enabling and disabling vfs.
To distinguish this operation from setting the root pin state, the
availability setting is adjusted as well to be similar to the
menu that shows in the shell extensions.
This helps support 2.5 settings where there are virtual files in the
tree but new files aren't created virtual.
It's also a prelude for #6815
There's currently no way of
- upgrading vfs plugins (a silent suffix->winvfs upgrade is attempted
once only, when moving to master)
- disabling vfs capabilities outright
UserModel can't be connected to AccountSettings if the settings dialog
doesn't exist. This is the case now since we delay the creation of that
dialog and free it after use.
Instead it should be properly channeled through the Systray object all
the way up to OwncloudGui which knows how to handle this properly.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Split widgets and slot to handle the refreshing of the view:
- refreshSelectiveSyncStatus is connected to signal dirtyChanged
and will handle big folder warning.
- slotSelectiveSyncChanged which is connected to dataChanged signal
and will handle the selective sync warning. It fixes#1029 because
it looks for the checkbox state before showing the warning.
Signed-off-by: Camila <hello@camila.codes>
Turns out that showing the button straight from the page ctor is a bit
too early. At that point the account might not be connected yet and thus
we wouldn't have proper information. Currently we were displaying that
button all the time, now we wait for the account to be connected to
decide to show it or not.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
We lost the ability to display the E2EE mnemonic during the GUI
redesign and the info message wasn't displayed again on restart. So now
we display it every time, it still can be dismissed and the button text
is different in such a case to make the intent clearer.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
- The code handling the api response was not up to date with the latest
api changes.
- Unlimited quota display: use qint64 to avoid data loss
- Change total with quota: total holds the quota total and not the storage total.
Signed-off-by: Camila <hello@camila.codes>
This way this whole logic isn't stuck into the settings dialog anymore.
Also cleaned up the unused "decrypt folder" logic.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Since we want to move to a place where the encryption of subfolders is
always enforced it makes no sense to leave it in control of the user.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Using a reference capture is a disaster waiting to happen here, if for
some reason we'd move from exec() to popup() for the menu below we'd be
getting garbage in the lambda call.
Signed-off-by: Kevin Ottens <kevin.ottens@nextcloud.com>
Make the codebase consistent, we already have a lot of implicit pointer comparisons.
Exception: Stay explicit on return's, example:
return _db != nullptr;
Signed-off-by: Michael Schuster <michael@schuster.ms>
The PropfindJob quota includes the size of shares and thus leads to confusion
in regard of the real space available, as shown in the UI.
This commit aims to streamline the behaviour with the Android and iOS apps,
which also utilize the API.
Details:
- Refactor the QuotaInfo class into UserInfo
- Use JsonApiJob (ocs/v1.php/cloud/user) instead of PropfindJob
- Let ConnectionValidator use the new UserInfo class to fetch
the user and the avatar image (to avoid code duplication)
- Allow updating the avatar image upon AccountSettings visibility,
using UserInfo's quota fetching
Signed-off-by: Michael Schuster <michael@schuster.ms>
Use customizeStyle() to change link colours in the SettingsDialog and notify it's widgets via slots.
Also modify the background colour of the errors messages in AccountSettings::showConnectionLabel
to always use an appropiate colour for it's custom-defined background.
Signed-off-by: Michael Schuster <michael@schuster.ms>
Reverts back to the SettingsDialog class because of bugs and glitches with
more recent Qt versions (Qt 5.12) and with the macOS Dark Mode.
See upstream: https://github.com/owncloud/client/pull/7492
Signed-off-by: Michael Schuster <michael@schuster.ms>
- When the the users logs because of 401 or 403 errors, it checks if the
server requested the remote wipe. If yes, locally deletes account and folders
connected to the account and notify the server. If no, proceeds to ask the
user to login again.
- The app password is restored in the keychain.
- WIP: The change also includes a test class for RemoteWipe.
Signed-off-by: Camila San <hello@camila.codes>
- Text changed to "Enable..." instead of "Setup"
- The close icon follows NC style
- "end-to-end" instead of "end to end"
Signed-off-by: Ivan Čukić <ivan.cukic@kde.org>
Instead of immediately popping up the mnemonic dialogue,
only show a notification bar on the account setup page.
For the cases where the user does not want to use E2E,
this is significantly less intrusive than the old approach.
The specs forbid the encryption or decryption of a
non empty folder. so...
1 - check for the sync status, if it's not synced return
as there's no way that I can say that there's items on the
server right now without waiting for the sync to finish
2 - verify if the folder is empty locally
as the user could have send some files to the folder.
The menu can be open with the keyboard shortcut.
(Fixup for the fix of #5596)
Also use popup instead of exec to show the menu: it's safer as it does
not re-enter the event loop.
It appears that Qt implementation of the DELETE http request
does not send bodyData, and we need that for Nextcloud.
Currently I changed the http request on the server side
to accept a POST instead of a DELETE, so I can actually
develop.
Also, I already poked the Qt developers that did this code.
If the server supports client syde encryption, display
a menu on right click that should display encrypt and decrypt.
ideally it would show the encrypt if the folder is decrypted, and
decrypt if the folder is encrypted but currently there's no way
for the client to know that.
This is motivated by the fact that QMetaObject::noralizeSignature takes 7.35%
CPU of the LargeSyncBench. (Mostly from ABstractNetworkJob::setupConnections and
PropagateUploadFileV1::startNextChunk). It could be fixed by using normalized
signature in the connection statement, but i tought it was a good oportunity
to modernize the code.
This commit only contains calls that were automatically converted with clazy.
Now that csync builds as C++, this will avoid having to implement
functionalities needed by csync mandatorily in csync itself.
This library is built as part of libocsync and symbols exported
through it.
This requires a relicense of Utility as LGPL. All classes moved into
this library from src/libsync will need to be relicensed as well.
* Add a more functional error view #5516
* Allow filtering of ignores and warnings to see only important bits.
* Navigate from the folder view to the error view by clicking on the
error list with the red background.
* Move the error list into its own ui file to allow easier extension.
* Fix issue around tab id handling in ActivitySettings.
* Rename "Action" column to "Issue".
* Change mouse cursor to hand over button and new error list area
Several OSX fixes provided by guruz.
These would otherwise be line-wrapped by clang-format,
and then consecutive reformattings remove the aligned
comment indentation
Example:
int a; // too long comment
->
int a; // too long
// comment
->
int a; // too long
// comment
Use qCInfo for anything that has general value for support and
development. Use qCWarning for any recoverable error and qCCritical
for anything that could result in data loss or would identify a serious
issue with the code.
Issue #5647
This gives more insight about the logs and allow setting fine-tuned
logging rules. The categories are set to only output Info by default
so this allows us to provide more concise logging while keeping the
ability to extract more information for a specific category when
developping or debugging customer issues.
Issue #5647
When we first detect a 503 (probably from a PROPFIND) and enter the
ServiceUnavailable state, we new trigger a status.php query that will
switch the state to MaintenanceMode if necessary.
- I checked every occurence of a '%2' and make correct use of the
QString::arg overload that takes several argument instead of chaining
them, because the first argument can contains a '%1'
- I tried to look for every label that they either use plain text or richtext
and escape the user provided strings in there.
Added two checkboxes in the Account Wizard in the advanced page to change the first options.
Also added a checkbox in the general settings to ask for confirmation for external storages.
Theme options allow to hide the checkboxes in the wizard.
As described in issue #5340
Instead of using the regular selective-sync UI (where it's unclear what
the "Cancel" button would even mean in this context), provide a
different set of buttons that allow the user to quickly synchronize
all pending big folders, none of them, or perform manual changes
as usual.
Before commit 1a51b6718a, the wizard was
making sure folder had an alias but this is no longer the case.
So generate still an unique alias.
Alias is not used in the UI any longer, it's just use for internal purposes.
For issue #4737
