Converts tests/rest/admin/test_room.py to have unix file endings after they were accidentally changed in #7613.
Keeping the same changelog as #7613 as it hasn't gone out in a release yet.
This table is no longer used, so we may as well stop populating it. Removing it
would prevent people rolling back to older releases of Synapse, so that can
happen in a future release.
* Fix spec compliance; tweaks without values are valid
(default to True, which is only concretely specified for
`highlight`, but it seems only reasonable to generalise)
* Changelog for 7766.
* Add documentation to `tweaks_for_actions`
May as well tidy up when I'm here.
* Add a test for `tweaks_for_actions`
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
State res v2 across large data sets can be very CPU intensive, and if
all the relevant events are in the cache the algorithm will run from
start to finish within a single reactor tick. This can result in
blocking the reactor tick for several seconds, which can have major
repercussions on other requests.
To fix this we simply add the occaisonal `sleep(0)` during iterations to
yield execution until the next reactor tick. The aim is to only do this
for large data sets so that we don't impact otherwise quick resolutions.=
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
Fixes https://github.com/matrix-org/synapse/issues/7683
Broke in: #7649
We had a `yield` acting on a coroutine. To be fair this one is a bit difficult to notice as there's a function in the middle that just passes the coroutine along.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
Calls `self.get_success` on all deferred methods instead of abusing `self.pump()`. This has the benefit of working with coroutines, as well as checking that method execution completed successfully.
There are also a few small cleanups that I made in the process.
It looks like `user_device_resync` was ignoring cross-signing keys from the results received from the remote server. This patch fixes this, by processing these keys using the same process `_handle_signing_key_updates` does (and effectively factor that part out of that function).
A couple of changes of significance:
* remove the `_last_ack < federation_position` condition, so that
updates will still be correctly processed after restart
* Correctly wire up send_federation_ack to the right class.
The idea here is that if an instance persists an event via the replication HTTP API it can return before we receive that event over replication, which can lead to races where code assumes that persisting an event immediately updates various caches (e.g. current state of the room).
Most of Synapse doesn't hit such races, so we don't do the waiting automagically, instead we do so where necessary to avoid unnecessary delays. We may decide to change our minds here if it turns out there are a lot of subtle races going on.
People probably want to look at this commit by commit.
When a call to `user_device_resync` fails, we don't currently mark the remote user's device list as out of sync, nor do we retry to sync it.
https://github.com/matrix-org/synapse/pull/6776 introduced some code infrastructure to mark device lists as stale/out of sync.
This commit uses that code infrastructure to mark device lists as out of sync if processing an incoming device list update makes the device handler realise that the device list is out of sync, but we can't resync right now.
It also adds a looping call to retry all failed resync every 30s. This shouldn't cause too much spam in the logs as this commit also removes the "Failed to handle device list update for..." warning logs when catching `NotRetryingDestination`.
Fixes#7418
Make sure that the AccountDataStream presents complete updates, in the right
order.
This is much the same fix as #7337 and #7358, but applied to a different stream.
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl69IQ8ACgkQOSor00I9
eP87lAf8DK+v6cs2U0BoD5opzQ7ZazJT6JYTmnMBaTzHU6Wx20V2ttkF7Vpwm3WU
Zsz0048tdYtHFyYBQ1kF5RNIBBJwV8SA/QUcPkR7FVpwZMLR2q4aJn0EE7kC9OMf
tYsmdbHeBdyfLXpXzazxWlgHquLyEIt52ykAcCphjx/Jl2fAExFEhtfsxpECoJ2f
8Dqhjg3WFjd6QWU6AFkElbwHUYCdIWdJOcsC8N1p8OvBmDz5QXv/RlYipHE00Cpx
QQQOgEjdRc6dlz2mbetMklnfII3p2kO9bzNdmEpOzT0Zt7nFaGdntW4I1QA0yJfa
gows9bYMzhqYk7YSiyTYOZ4qyavVtw==
=N/zZ
-----END PGP SIGNATURE-----
Merge tag 'v1.13.0rc2' into develop
Synapse 1.13.0rc2 (2020-05-14)
==============================
Bugfixes
--------
- Fix a long-standing bug which could cause messages not to be sent over federation, when state events with state keys matching user IDs (such as custom user statuses) were received. ([\#7376](https://github.com/matrix-org/synapse/issues/7376))
- Restore compatibility with non-compliant clients during the user interactive authentication process, fixing a problem introduced in v1.13.0rc1. ([\#7483](https://github.com/matrix-org/synapse/issues/7483))
Internal Changes
----------------
- Fix linting errors in new version of Flake8. ([\#7470](https://github.com/matrix-org/synapse/issues/7470))
Fix a bug where the `get_joined_users` cache could be corrupted by custom
status events (or other state events with a state_key matching the user ID).
The bug was introduced by #2229, but has largely gone unnoticed since then.
Fixes#7099, #7373.
The aim here is to get to a stage where we have a `PersistEventStore` that holds all the write methods used during event persistence, so that we can take that class out of the `DataStore` mixin and instansiate it separately. This will allow us to instansiate it on processes other than master, while also ensuring it is only available on processes that are configured to write to events stream.
This is a bit of an architectural change, where we end up with multiple classes per data store (rather than one per data store we have now). We end up having:
1. Storage classes that provide high level APIs that can talk to multiple data stores.
2. Data store modules that consist of classes that must point at the same database instance.
3. Classes in a data store that can be instantiated on processes depending on config.
* release-v1.13.0:
Don't UPGRADE database rows
RST indenting
Put rollback instructions in upgrade notes
Fix changelog typo
Oh yeah, RST
Absolute URL it is then
Fix upgrade notes link
Provide summary of upgrade issues in changelog. Fix )
Move next version notes from changelog to upgrade notes
Changelog fixes
1.13.0rc1
Documentation on setting up redis (#7446)
Rework UI Auth session validation for registration (#7455)
Fix errors from malformed log line (#7454)
Drop support for redis.dbid (#7450)
For in memory streams when fetching updates on workers we need to query the source of the stream, which currently is hard coded to be master. This PR threads through the source instance we received via `POSITION` through to the update function in each stream, which can then be passed to the replication client for in memory streams.
We move the processing of typing and federation replication traffic into their handlers so that `Stream.current_token()` points to a valid token. This allows us to remove `get_streams_to_replicate()` and `stream_positions()`.
By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
For direct TCP connections we need the master to relay REMOTE_SERVER_UP
commands to the other connections so that all instances get notified
about it. The old implementation just relayed to all connections,
assuming that sending back to the original sender of the command was
safe. This is not true for redis, where commands sent get echoed back to
the sender, which was causing master to effectively infinite loop
sending and then re-receiving REMOTE_SERVER_UP commands that it sent.
The fix is to ensure that we only relay to *other* connections and not
to the connection we received the notification from.
Fixes#7334.
* Factor out functions for injecting events into database
I want to add some more flexibility to the tools for injecting events into the
database, and I don't want to clutter up HomeserverTestCase with them, so let's
factor them out to a new file.
* Rework TestReplicationDataHandler
This wasn't very easy to work with: the mock wrapping was largely superfluous,
and it's useful to be able to inspect the received rows, and clear out the
received list.
* Fix AssertionErrors being thrown by EventsStream
Part of the problem was that there was an off-by-one error in the assertion,
but also the limit logic was too simple. Fix it all up and add some tests.
Specifically some tests for the typing stream, which means we test streams that fetch missing updates via HTTP (rather than via the DB).
We also shuffle things around a bit so that we create two separate `HomeServer` objects, rather than trying to insert a slaved store into places.
Note: `test_typing.py` is heavily inspired by `test_receipts.py`
First some background: StreamChangeCache is used to keep track of what "entities" have
changed since a given stream ID. So for example, we might use it to keep track of when the last
to-device message for a given user was received [1], and hence whether we need to pull any to-device messages from the database on a sync [2].
Now, it turns out that StreamChangeCache didn't support more than one thing being changed at
a given stream_id (this was part of the problem with #7206). However, it's entirely valid to send
to-device messages to more than one user at a time.
As it turns out, this did in fact work, because *some* methods of StreamChangeCache coped
ok with having multiple things changing on the same stream ID, and it seems we never actually
use the methods which don't work on the stream change caches where we allow multiple
changes at the same stream ID. But that feels horribly fragile, hence: let's update
StreamChangeCache to properly support this, and add some typing and some more tests while
we're at it.
[1]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L301
[2]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L47-L51
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
Fixes#6815
Before figuring out whether we should alert a user on MAU, we call get_notice_room_for_user to get some info on the existing server notices room for this user. This function, if the room doesn't exist, creates it and invites the user in it. This means that, if we decide later that no server notice is needed, the user gets invited in a room with no message in it. This happens at every restart of the server, since the room ID returned by get_notice_room_for_user is cached.
This PR fixes that by moving the inviting bit to a dedicated function, that's only called when the server actually needs to send a notice to the user. A potential issue with this approach is that the room that's created by get_notice_room_for_user doesn't match how that same function looks for an existing room (i.e. it creates a room that doesn't have an invite or a join for the current user in it, so it could lead to a new room being created each time a user syncs), but I'm not sure this is a problem given it's cached until the server restarts, so that function won't run very often.
It also renames get_notice_room_for_user into get_or_create_notice_room_for_user to make what it does clearer.
Occasionally we could get a federation device list update transaction which
looked like:
```
[
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D2', 'prev_id': [], 'stream_id': 12, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D1', 'prev_id': [12], 'stream_id': 11, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D3', 'prev_id': [11], 'stream_id': 13, 'deleted': True}}
]
```
Having `stream_ids` which are lower than `prev_ids` looks odd. It might work
(I'm not actually sure), but in any case it doesn't seem like a reasonable
thing to expect other implementations to support.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
* Pull Sentinel out of LoggingContext
... and drop a few unnecessary references to it
* Factor out LoggingContext.current_context
move `current_context` and `set_context` out to top-level functions.
Mostly this means that I can more easily trace what's actually referring to
LoggingContext, but I think it's generally neater.
* move copy-to-parent into `stop`
this really just makes `start` and `stop` more symetric. It also means that it
behaves correctly if you manually `set_log_context` rather than using the
context manager.
* Replace `LoggingContext.alive` with `finished`
Turn `alive` into `finished` and make it a bit better defined.
* Add 'device_lists_outbound_pokes' as extra table.
This makes sure we check all the relevant tables to get the current max
stream ID.
Currently not doing so isn't problematic as the max stream ID in
`device_lists_outbound_pokes` is the same as in `device_lists_stream`,
however that will change.
* Change device lists stream to have one row per id.
This will make it possible to process the streams more incrementally,
avoiding having to process large chunks at once.
* Change device list replication to match new semantics.
Instead of sending down batches of user ID/host tuples, send down a row
per entity (user ID or host).
* Newsfile
* Remove handling of multiple rows per ID
* Fix worker handling
* Comments from review
It was originally implemented by pulling the full auth chain of all
state sets out of the database and doing set comparison. However, that
can take a lot work if the state and auth chains are large.
Instead, lets try and fetch the auth chains at the same time and
calculate the difference on the fly, allowing us to bail early if all
the auth chains converge. Assuming that the auth chains do converge more
often than not, this should improve performance. Hopefully.
When we get an invite over federation, store the room version in the rooms table.
The general idea here is that, when we pull the invite out again, we'll want to know what room_version it belongs to (so that we can later redact it if need be). So we need to store it somewhere...
The state res v2 algorithm only cares about the difference between auth
chains, so we can pass in the known common state to the `get_auth_chain`
storage function so that it can ignore those events.
* Reject device display names that are too long.
Too long is currently defined as 100 characters in length.
* Add a regression test for rejecting a too long device display name.
