1
0
Fork 0
mirror of https://github.com/element-hq/synapse.git synced 2024-12-23 05:00:24 +03:00
synapse/docker/README-testing.md

138 lines
5.7 KiB
Markdown
Raw Normal View History

Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
# Running tests against a dockerised Synapse
It's possible to run integration tests against Synapse
using [Complement](https://github.com/matrix-org/complement). Complement is a Matrix Spec
compliance test suite for homeservers, and supports any homeserver docker image configured
to listen on ports 8008/8448. This document contains instructions for building Synapse
docker images that can be run inside Complement for testing purposes.
Note that running Synapse's unit tests from within the docker image is not supported.
## Using the Complement launch script
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
`scripts-dev/complement.sh` is a script that will automatically build
and run Synapse against Complement.
Consult the [contributing guide][guideComplementSh] for instructions on how to use it.
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
2023-12-13 19:15:22 +03:00
[guideComplementSh]: https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-integration-tests-complement
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
## Building and running the images manually
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
Under some circumstances, you may wish to build the images manually.
The instructions below will lead you to doing that.
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
Note that these images can only be built using [BuildKit](https://docs.docker.com/develop/develop-images/build_enhancements/),
therefore BuildKit needs to be enabled when calling `docker build`. This can be done by
setting `DOCKER_BUILDKIT=1` in your environment.
Start by building the base Synapse docker image. If you wish to run tests with the latest
release of Synapse, instead of your current checkout, you can skip this step. From the
root of the repository:
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
```sh
docker build -t matrixdotorg/synapse -f docker/Dockerfile .
```
Next, build the workerised Synapse docker image, which is a layer over the base
image.
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
```sh
docker build -t matrixdotorg/synapse-workers -f docker/Dockerfile-workers .
```
Finally, build the multi-purpose image for Complement, which is a layer over the workers image.
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
```sh
docker build -t complement-synapse -f docker/complement/Dockerfile docker/complement
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
```
This will build an image with the tag `complement-synapse`, which can be handed to
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
Complement for testing via the `COMPLEMENT_BASE_IMAGE` environment variable. Refer to
[Complement's documentation](https://github.com/matrix-org/complement/#running) for
how to run the tests, as well as the various available command line flags.
See [the Complement image README](./complement/README.md) for information about the
expected environment variables.
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
## Running the Dockerfile-worker image standalone
For manual testing of a multi-process Synapse instance in Docker,
[Dockerfile-workers](Dockerfile-workers) is a Dockerfile that will produce an image
bundling all necessary components together for a workerised homeserver instance.
This includes any desired Synapse worker processes, a nginx to route traffic accordingly,
a redis for worker communication and a supervisord instance to start up and monitor all
processes. You will need to provide your own postgres container to connect to, and TLS
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
is not handled by the container.
Once you've built the image using the above instructions, you can run it. Be sure
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
you've set up a volume according to the [usual Synapse docker instructions](README.md).
Then run something along the lines of:
```
docker run -d --name synapse \
--mount type=volume,src=synapse-data,dst=/data \
-p 8008:8008 \
-e SYNAPSE_SERVER_NAME=my.matrix.host \
-e SYNAPSE_REPORT_STATS=no \
-e POSTGRES_HOST=postgres \
-e POSTGRES_USER=postgres \
-e POSTGRES_PASSWORD=somesecret \
-e SYNAPSE_WORKER_TYPES=synchrotron,media_repository,user_dir \
-e SYNAPSE_WORKERS_WRITE_LOGS_TO_DISK=1 \
matrixdotorg/synapse-workers
```
...substituting `POSTGRES*` variables for those that match a postgres host you have
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
available (usually a running postgres docker container).
### Workers
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
The `SYNAPSE_WORKER_TYPES` environment variable is a comma-separated list of workers to
use when running the container. All possible worker names are defined by the keys of the
`WORKERS_CONFIG` variable in [this script](configure_workers_and_start.py), which the
Dockerfile makes use of to generate appropriate worker, nginx and supervisord config
files.
Sharding is supported for a subset of workers, in line with the
[worker documentation](../docs/workers.md). To run multiple instances of a given worker
type, simply specify the type multiple times in `SYNAPSE_WORKER_TYPES`
(e.g `SYNAPSE_WORKER_TYPES=event_creator,event_creator...`).
Otherwise, `SYNAPSE_WORKER_TYPES` can either be left empty or unset to spawn no workers
(leaving only the main process).
The container will only be configured to use Redis-based worker mode if there are
workers enabled.
### Logging
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
Logs for workers and the main process are logged to stdout and can be viewed with
standard `docker logs` tooling. Worker logs contain their worker name
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
after the timestamp.
Setting `SYNAPSE_WORKERS_WRITE_LOGS_TO_DISK=1` will cause worker logs to be written to
`<data_dir>/logs/<worker_name>.log`. Logs are kept for 1 week and rotate every day at 00:
00, according to the container's clock. Logging for the main process must still be
Add a dockerfile for running a set of Synapse worker processes (#9162) This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with: * A Synapse main process. * Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime. * A redis for worker communication. * A nginx for routing traffic. * A supervisord to start all worker processes and monitor them if any go down. Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite. `configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI. Huge thanks to @MatMaul for helping get this all working :tada: This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62. Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
2021-04-14 15:54:49 +03:00
configured by modifying the homeserver's log config in your Synapse data volume.
### Application Services
Setting the `SYNAPSE_AS_REGISTRATION_DIR` environment variable to the path of
a directory (within the container) will cause the configuration script to scan
that directory for `.yaml`/`.yml` registration files.
Synapse will be configured to load these configuration files.
### TLS Termination
Nginx is present in the image to route requests to the appropriate workers,
but it does not serve TLS by default.
You can configure `SYNAPSE_TLS_CERT` and `SYNAPSE_TLS_KEY` to point to a
TLS certificate and key (respectively), both in PEM (textual) format.
In this case, Nginx will additionally serve using HTTPS on port 8448.