ActivityItemOpen %1 locallyIn %1ActivityItemContentOpen file detailsDismissActivityListActivity listNo activities yetBasicComboBoxClear status message menuCallNotificationDialogTalk notification caller avatarAnswer Talk call notificationDeclineDecline Talk call notificationCloudProviderWrapper%1 (%2, %3)Checking for changes in "%1"Syncing %1 of %2 (%3 left)Syncing %1 of %2Syncing %1 (%2 left)Syncing %1No recently changed filesSync pausedSyncingOpen websiteRecently changedPause synchronizationHelpSettingsLog outQuit sync clientConflictDelegateLocal versionServer versionEditFileLocallyLoadingDialogOpening file for local editingEmojiPickerNo recent emojisErrorBoxErrorFileDetailsPageDismissActivitySharingFileDetailsWindowFile details of %1 · %2FileProviderEvictionDialogEvict materialised filesMaterialised itemsReloadFileProviderFastEnumerationSettingsEnable fast syncFast sync will only sync changes in files and folders within folders that have been explored. This can significantly increase responsiveness on initial configuration of virtual files. However, it will cause redundant downloads of files moved to an unexplored folder. FileProviderFileDelegateDeleteFileProviderSettingsVirtual files settingsGeneral settingsEnable virtual filesAdvancedSignal file provider domainCreate debug archiveFileProviderStorageInfoLocal storage use%1 GB of %2 GB remote files syncedEvict local copies...FileProviderSyncStatusSyncingAll synced!FileSystemError removing "%1": %2Could not remove folder "%1"Could not make directories in trashCould not move "%1" to "%2"Moving to the trash is not implemented on this platformFlow2AuthWidgetBrowser AuthenticationLogoSwitch to your browser to connect your accountAn error occurred while connecting. Please try again.FolderWizardSourcePagePick a local folder on your computer to sync&Choose …FolderWizardTargetPageSelect a remote destination folderCreate folderRefreshFoldersMainWindowNextcloud desktop main dialogueCurrent accountResume sync for allPause sync for allAdd accountAdd new accountSettingsExitCurrent account avatarCurrent account status is onlineCurrent account status is do not disturbAccount switcher and settings menuOpen local or group foldersMore appsOpen %1 in browserUnified search results listNew activitiesOCC::AbstractNetworkJobConnection timed outUnknown error: network reply was deletedServer replied "%1 %2" to "%3 %4"OCC::AccountFile %1 is already locked by %2.Lock operation on %1 failed with error %2Unlock operation on %1 failed with error %2OCC::AccountManagerAn existing configuration from a legacy desktop client was detected.
Should an account import be attempted?%1 accounts were detected from a legacy desktop client.
Should the accounts be imported?1 account was detected from a legacy desktop client.
Should the account be imported?Legacy importImportSkipSuccessfully imported account from legacy client: %1Could not import accounts from legacy client configuration.OCC::AccountSettingsStorage space: …Unchecked folders will be <b>removed</b> from your local file system and will not be synchronised to this computer any moreCancelApplyConnected with <server> as <user>Synchronise allSynchronize noneApply manual changesStandard file syncVirtual file syncConnection settingsEnd-to-end Encryption with Virtual FilesYou seem to have the Virtual Files feature enabled on this folder. At the moment, it is not possible to implicitly download virtual files that are end-to-end encrypted. To get the best experience with virtual files and end-to-end encryption, make sure the encrypted folder is marked with "Make always available locally".Do not encrypt folderEncrypt folderEnd-to-end EncryptionThis will encrypt your folder and all files within it. These files will no longer be accessible without your encryption mnemonic key.
<b>This process is not reversible. Are you sure you want to proceed?</b>No account configured.Disable encryptionDisplay mnemonicEnd-to-end encryption has been enabled for this accountWarningPlease wait for the folder to sync before trying to encrypt it.The folder has a minor sync problem. Encryption of this folder will be possible once it has synced successfullyThe folder has a sync error. Encryption of this folder will be possible once it has synced successfullyEnd-to-end encryption is not configured on this device. Once it is configured, you will be able to encrypt this folder.
Would you like to set up end-to-end encryption?You cannot encrypt a folder with contents, please remove the files.
Wait for the new sync, then encrypt it.Encryption failedCould not encrypt folder because the folder does not exist anymoreOpen folderEncryptEdit Ignored FilesCreate new folderAvailabilityChoose what to syncForce sync nowRestart syncResume syncPause syncRemove folder sync connectionDisable virtual file support …Enable virtual file support %1 …(experimental)Folder creation failed<p>Could not create local folder <i>%1</i>.</p>Confirm Folder Sync Connection Removal<p>Do you really want to stop syncing the folder <i>%1</i>?</p><p><b>Note:</b> This will <b>not</b> delete any files.</p>Remove Folder Sync ConnectionDisable virtual file support?This action will disable virtual file support. As a consequence contents of folders that are currently marked as "available online only" will be downloaded.
The only advantage of disabling virtual file support is that the selective sync feature will become available again.
This action will abort any currently running synchronization.Disable supportEnd-to-end encryption mnemonicTo protect your Cryptographic Identity, we encrypt it with a mnemonic of 12 dictionary words. Please note these down and keep them safe. They will be needed to add other devices to your account (like your mobile phone or laptop).Disable end-to-end encryptionDisable end-to-end encryption for %1?Removing end-to-end encryption will remove locally-synced files that are encrypted.<br>Encrypted files will remain on the server.Sync RunningThe syncing operation is running.<br/>Do you want to terminate it?%1 (%3%) of %2 in use. Some folders, including network mounted or shared folders, might have different limits.%1 of %2 in useCurrently there is no storage usage information available.%1 in use%1 as %2The server version %1 is unsupported! Proceed at your own risk.Connected to %1.Server %1 is temporarily unavailable.Server %1 is currently in maintenance mode.Server %1 is currently being redirected, or your connection is behind a captive portal.Signed out from %1.Obtaining authorisation from the browser. <a href='%1'>Click here</a> to re-open the browser.Connecting to %1 …No connection to %1 at %2.Unable to connect to %1.Server configuration error: %1 at %2.No %1 connection configured.There are folders that were not synchronised because they are too big: There are folders that were not synchronised because they are external storages: There are folders that were not synchronised because they are too big or external storages: There are folders that have grown in size beyond %1MB: %2End-to-end encryption has been enabled on this account with another device.<br>It can be enabled on this device by entering your mnemonic.<br>This will enable synchronisation of existing encrypted folders.This account supports end-to-end encryptionSet up encryptionOCC::AccountSetupFromCommandLineJobThe authenticated request to the server was redirected to "%1". The URL is bad, the server is misconfigured.Access forbidden by server. To verify that you have proper access, <a href="%1">click here</a> to access the service with your browser.There was an invalid response to an authenticated WebDAV requestOCC::AccountStateSigned outDisconnectedConnectedService unavailableMaintenance modeRedirect detectedNetwork errorConfiguration errorAsking CredentialsUnknown account stateOCC::ActivityListModelFor more activities please open the Activity app.Fetching activities …Network error occurred: client will retry syncing.Files from the ignore list as well as symbolic links are not synced.OCC::AddCertificateDialogSSL client certificate authenticationThis server probably requires a SSL client certificate.Certificate & Key (pkcs12):Browse …Certificate password:An encrypted pkcs12 bundle is strongly recommended as a copy will be stored in the configuration file.Select a certificateCertificate files (*.p12 *.pfx)OCC::ApplicationSome settings were configured in %1 versions of this client and use features that are not available in this version.<br><br>Continuing will mean <b>%2 these settings</b>.<br><br>The current configuration file was already backed up to <i>%3</i>.newer software versionnewerolder software versionolderignoringdeletingQuitContinuenumber of accounts imported%1 accounts1 accountnumber of folders imported%1 folders1 folderLegacy importnumber of accounts and folders imported. list of users.Imported %1 and %2 from a legacy desktop client.
%3Error accessing the configuration fileThere was an error while accessing the configuration file at %1. Please make sure the file can be accessed by your system account.Quit %1OCC::AuthenticationDialogAuthentication RequiredEnter username and password for "%1" at %2.&Username:&Password:OCC::BasePropagateRemoteDeleteEncrypted"%1 Failed to unlock encrypted folder %2".Wrong HTTP code returned by server. Expected 204, but received "%1 %2".OCC::BulkPropagatorJobFile %1 cannot be uploaded because another file with the same name, differing only in case, existsFile %1 has invalid modified time. Do not upload to the server.File Removed (start upload) %1File %1 has invalid modification time. Do not upload to the server.Local file changed during syncing. It will be resumed.Local file changed during sync.Network error: %1Error updating metadata: %1The file %1 is currently in useThe local file was removed during sync.Restoration failed: %1OCC::CaseClashConflictSolverCannot rename file because a file with the same name already exists on the server. Please pick another name.Could not rename file. Please make sure you are connected to the server.You don't have the permission to rename this file. Please ask the author of the file to rename it.Failed to fetch permissions with error %1Filename contains leading and trailing spaces.Filename contains leading spaces.Filename contains trailing spaces.OCC::CaseClashFilenameDialogCase Clash ConflictThe file could not be synced because it generates a case clash conflict with an existing file on this system.ErrorExisting filefile Atoday0 byteOpen existing fileCase clashing filefile BOpen clashing filePlease enter a new name for the clashing file:New filenameRename fileThe file "%1" could not be synced because of a case clash conflict with an existing file on this system.%1 does not support equal file names with only letter casing differences.Filename contains leading and trailing spaces.Filename contains leading spaces.Filename contains trailing spaces.Use invalid nameFilename contains illegal characters: %1OCC::CleanupPollsJobError writing metadata to the databaseOCC::ClientSideEncryptionPlease enter your end-to-end encryption passphrase:<br><br>Username: %2<br>Account: %3<br>Enter E2E passphraseOCC::ConflictDialogSync ConflictConflicting versions of %1.Which version of the file do you want to keep?<br/>If you select both versions, the local file will have a number added to its name.Local versionClick to open the filetoday0 byte<a href="%1">Open local version</a>Server version<a href="%1">Open server version</a>Keep selected versionOpen local versionOpen server versionKeep both versionsKeep local versionKeep server versionOCC::ConflictSolverDo you want to delete the directory <i>%1</i> and all its contents permanently?Do you want to delete the file <i>%1</i> permanently?Confirm deletionErrorMoving file failed:
%1OCC::ConnectionValidatorNo Nextcloud account configuredAuthentication error: Either username or password are wrong.TimeoutThe provided credentials are not correctThe configured server for this client is too oldPlease update to the latest server and restart the client.OCC::DiscoveryPhaseError while canceling deletion of a fileError while canceling deletion of %1OCC::DiscoverySingleDirectoryJobServer error: PROPFIND reply is not XML formatted!Encrypted metadata setup error!OCC::DiscoverySingleLocalDirectoryJobError while opening directory %1Directory not accessible on client, permission deniedDirectory not found: %1Filename encoding is not validError while reading directory %1OCC::EditLocallyJobCould not start editing locally.An error occurred during setup.Could not find a file for local editing. Make sure its path is valid and it is synced locally.Invalid token received.Could not find a file for local editing. Make sure it is not excluded via selective sync.Invalid file path was provided.Could not find an account for local editing.An error occurred trying to verify the request to edit locally.An error occurred during data retrieval.Could not validate the request to open a file from server.An error occurred trying to synchronise the file to edit locally.Server error: PROPFIND reply is not XML formatted!Could not find a remote file info for local editing. Make sure its path is valid.Invalid local file path.Could not open %1Please try again.File %1 already locked.Lock will last for %1 minutes. You can also unlock this file manually once you are finished editing.File %1 now locked.File %1 could not be locked.OCC::EditLocallyManagerCould not validate the request to open a file from server.Please try again.OCC::EditLocallyVerificationJobInvalid token received.Please try again.Invalid file path was provided.Could not find an account for local editing.Could not start editing locally.An error occurred trying to verify the request to edit locally.OCC::EncryptFolderJobCould not generate the metadata for encryption, Unlocking the folder.
This can be an issue with your OpenSSL libraries.OCC::EncryptedFolderMetadataHandlerError fetching metadata.Error locking folder.Error fetching encrypted folder ID.Error parsing or decrypting metadata.Failed to upload metadataOCC::FileDetailsseconds elapsed since file last modified%1 second(s) ago%1 second(s) agominutes elapsed since file last modified%1 minute(s) ago%1 minute(s) agohours elapsed since file last modified%1 hour(s) ago%1 hour(s) agodays elapsed since file last modified%1 day(s) ago%1 day(s) agomonths elapsed since file last modified%1 month(s) ago%1 month(s) agoyears elapsed since file last modified%1 year(s) ago%1 year(s) agoremaining time before lock expiresLocked by %1 - Expires in %2 minute(s)Locked by %1 - Expires in %2 minute(s)OCC::Flow2AuthThe polling URL does not start with HTTPS despite the login URL started with HTTPS. Login will not be possible because this might be a security issue. Please contact your administrator.Error returned from the server: <em>%1</em>There was an error accessing the "token" endpoint: <br><em>%1</em>Could not parse the JSON returned from the server: <br><em>%1</em>The reply from the server did not contain all expected fieldsThe returned server URL does not start with HTTPS despite the login URL started with HTTPS. Login will not be possible because this might be a security issue. Please contact your administrator.OCC::Flow2AuthWidgetUnable to open the Browser, please copy the link to your Browser.Waiting for authorizationPolling for authorizationStarting authorizationLink copied to clipboard.Reopen BrowserCopy LinkOCC::FolderLocal folder %1 does not exist.%1 should be a folder but is not.%1 is not readable.%1 and %n other file have been removed.%1 and %n other files have been removed.%1 names a file.%1 has been removed.%1 and %n other file(s) have been added.%1 and %n other file(s) have been added.%1 names a file.%1 has been added.%1 and %n other file have been updated.%1 and %n other files have been updated.%1 names a file.%1 has been updated.%1 has been renamed to %2 and %n other file have been renamed.%1 has been renamed to %2 and %n other files have been renamed.%1 and %2 name files.%1 has been renamed to %2.%1 has been moved to %2 and %n other file have been moved.%1 has been moved to %2 and %n other files have been moved.%1 has been moved to %2.%1 has and %n other file have sync conflicts.%1 has and %n other files have sync conflicts.%1 has a sync conflict. Please check the conflict file!%1 and %n other file could not be synced due to errors. See the log for details.%1 and %n other files could not be synced due to errors. See the log for details.%1 could not be synced due to an error. See the log for details.%1 and %n other file(s) are currently locked.%1 and %n other file(s) are currently locked.%1 is currently locked.Sync ActivityCould not read system exclude fileA new folder larger than %1 MB has been added: %2.
A folder from an external storage has been added.
Please go in the settings to select it if you wish to download it.A folder has surpassed the set folder size limit of %1MB: %2.
%3Keep syncingAll files in the sync folder "%1" folder were deleted on the server.
These deletes will be synchronized to your local sync folder, making such files unavailable unless you have a right to restore.
If you decide to restore the files, they will be re-synced with the server if you have rights to do so.
If you decide to delete the files, they will be unavailable to you, unless you are the owner.All the files in your local sync folder "%1" were deleted. These deletes will be synchronized with your server, making such files unavailable unless restored.
Are you sure you want to sync those actions with the server?
If this was an accident and you decide to keep your files, they will be re-synced from the server.Stop syncingRemove All Files?Remove all filesKeep filesThe folder %1 has surpassed the set folder size limit of %2MB.Would you like to stop syncing this folder?The folder %1 was created but was excluded from synchronization previously. Data inside it will not be synchronized.The file %1 was created but was excluded from synchronization previously. It will not be synchronized.Changes in synchronized folders could not be tracked reliably.
This means that the synchronization client might not upload local changes immediately and will instead only scan for local changes and upload them occasionally (every two hours by default).
%1Virtual file download failed with code "%1", status "%2" and error message "%3"Remove all files?OCC::FolderCreationDialogCreate new folderEnter folder nameFolder already existsErrorCould not create a folder! Check your write permissions.OCC::FolderManCould not reset folder stateAn old sync journal "%1" was found, but could not be removed. Please make sure that no application is currently using it. (backup) (backup %1)Undefined state.Waiting to start syncing.Preparing for sync.Syncing %1 of %2 (A few seconds left)Syncing %1 of %2 (%3 left)Syncing %1 of %2Syncing %1 (A few seconds left)Syncing %1 (%2 left)Syncing %1Sync is running.Sync finished with unresolved conflicts.Last sync was successful.Setup error.Sync request was cancelled.Sync is paused.%1 (Sync is paused)No valid folder selected!The selected path does not exist!The selected path is not a folder!You have no permission to write to the selected folder!The local folder %1 already contains a folder used in a folder sync connection. Please pick another one!The local folder %1 is already contained in a folder used in a folder sync connection. Please pick another one!There is already a sync from the server to this local folder. Please pick another local folder!OCC::FolderStatusDelegateAdd Folder Sync ConnectionFileOCC::FolderStatusModelYou need to be connected to add a folderClick this button to add a folder to synchronise.Could not decrypt!%1 (%2)Error while loading the list of folders from the server.Fetching folder list from server …There are unresolved conflicts. Click for details.Virtual file support is enabled.Signed outSynchronizing VirtualFiles with local folderSynchronizing with local folderSynchronizing virtual files in local folderSynchronizing files in local folderChecking for changes in remote "%1"Checking for changes in local "%1"Reconciling changesSyncing local and remote changesExample text: "Uploading foobar.png (1MB of 2MB) time left 2 minutes at a rate of 24Kb/s" Example text: "Syncing 'foo.txt', 'bar.txt'"%1 %2 …, Waiting …Example text: "Download 24Kb/s" (%1 is replaced by 24Kb (translated))Download %1/sExample text: "Syncing 'foo.txt', 'bar.txt'"Syncing %1↓ %1/sExample text: "download 24Kb/s" (%1 is replaced by 24Kb (translated))download %1/sExample text: "Upload 24Kb/s" (%1 is replaced by 24Kb (translated))Upload %1/s↑ %1/sExample text: "upload 24Kb/s" (%1 is replaced by 24Kb (translated))upload %1/sExample text: "uploading foobar.png (2MB of 2MB)"%1 %2 (%3 of %4)Example text: "uploading foobar.png"%1 %2Example text: "5 minutes left, 12 MB of 345 MB, file 6 of 7"A few seconds left, %1 of %2, file %3 of %4%5 left, %1 of %2, file %3 of %4Example text: "12 MB of 345 MB, file 6 of 7"%1 of %2, file %3 of %4File %1 of %2file %1 of %2About to start syncingWaiting for %n other folder(s) …Waiting for %n other folder(s) …Preparing to sync …OCC::FolderWatcherThe watcher did not receive a test notification.OCC::FolderWatcherPrivateThis problem usually happens when the inotify watches are exhausted. Check the FAQ for details.OCC::FolderWizardAdd Folder Sync ConnectionAdd Sync ConnectionOCC::FolderWizardLocalPathClick to select a local folder to sync.Enter the path to the local folder.Select the source folderOCC::FolderWizardRemotePathCreate Remote FolderEnter the name of the new folder to be created below "%1":Folder was successfully created on %1.Authentication failed accessing %1Failed to create the folder on %1. Please check manually.Failed to list a folder. Error: %1Choose this to sync the entire accountThis folder is already being synced.You are already syncing <i>%1</i>, which is a parent folder of <i>%2</i>.You are already syncing <i>%1</i>, which is a subfolder of <i>%2</i>.OCC::FolderWizardSelectiveSyncUse virtual files instead of downloading content immediately %1(experimental)Virtual files are not supported for Windows partition roots as local folder. Please choose a valid subfolder under drive letter.Virtual files are not available for the selected folderOCC::FormatWarningsWizardPage<b>Warning:</b> %1<b>Warning:</b>OCC::GETFileJobNo E-Tag received from server, check Proxy/GatewayWe received a different E-Tag for resuming. Retrying next time.We received an unexpected download Content-Length.Server returned wrong content-rangeConnection TimeoutOCC::GeneralSettingsAdvancedAboutAsk for confirmation before synchronizing new folders larger thanLegal noticeTrailing part of "Ask confirmation before syncing folder larger than" MBUse &Monochrome Icons&Launch on System StartupShow Server &NotificationsNotify when synchronised folders grow larger than specified limitShow Call NotificationsUpdates&Automatically check for UpdatesAutomatically disable synchronisation of folders that overcome limit&ChannelAsk for confirmation before synchronising external storagesMove removed files to trashShow sync folders in &Explorer's navigation paneS&how crash reporterEdit &Ignored FilesCreate Debug Archive&Check for Update nowInfoAsk for confirmation before synchronising folders larger thanDesktop client x.x.xUpdate channel&Restart && Update&Automatically check for updatesCheck NowUsage DocumentationLegal NoticeGeneral SettingsFor System TrayShow sync folders in &Explorer's Navigation PaneUse &monochrome icons&Launch on system startupShow server ¬ificationsShow call notificationsServer notifications that require attention.Show call notification dialogues.You cannot disable autostart because system-wide autostart is enabled.stablebetaChange update channel?The update channel determines which client updates will be offered for installation. The "stable" channel contains only upgrades that are considered reliable, while the versions in the "beta" channel may contain newer features and bugfixes, but have not yet been tested thoroughly.
Note that this selects only what pool upgrades are taken from, and that there are no downgrades: So going back from the beta channel to the stable channel usually cannot be done immediately and means waiting for a stable version that is newer than the currently installed beta version.dailyenterpriselist of available update channels to non enterprise users and downgrading warning- beta: contains versions with new features that may not be tested thoroughly
- daily: contains versions created daily only for testing and development
Downgrading versions is not possible immediately: changing from beta to stable means waiting for the new stable version.list of available update channels to enterprise users and downgrading warning- enterprise: contains stable versions for customers.
Downgrading versions is not possible immediately: changing from stable to enterprise means waiting for the new enterprise version.Changing update channel?starts list of available update channels, stable is always availableThe channel determines which upgrades will be offered to install:
- stable: contains tested versions considered reliable
Change update channelCancelZip ArchivesDebug Archive CreatedDebug archive is created at %1OCC::GetOrCreatePublicLinkSharePassword for share requiredPlease enter a password for your link share:Sharing errorCould not retrieve or create the public link share. Error:
%1OCC::HttpCredentialsGuiPlease enter %1 password:<br><br>Username: %2<br>Account: %3<br>Reading from keychain failed with error: "%1"Enter Password<a href="%1">Click here</a> to request an app password from the web interface.OCC::IgnoreListEditorIgnored Files EditorGlobal Ignore SettingsSync hidden filesFiles Ignored by PatternsThis entry is provided by the system at "%1" and cannot be modified in this view.OCC::IgnoreListTableWidgetPatternAllow DeletionAddRemoveRemove allFiles or folders matching a pattern will not be synchronized.
Items where deletion is allowed will be deleted if they prevent a directory from being removed. This is useful for meta data.Could not open fileCannot write changes to "%1".Add Ignore PatternAdd a new ignore pattern:OCC::InvalidFilenameDialogInvalid filenameThe file could not be synced because its name contains characters which are not allowed on this system.ErrorPlease enter a new name for the file:New filenameRename fileThe file "%1" could not be synced because the name contains characters which are not allowed on this system.The following characters are not allowed on the system: * " | & ? , ; : \ / ~ < > leading/trailing spacesThe file "%1" could not be synced because the name contains characters which are not allowed on the server.The following characters are not allowed: %1The following basenames are not allowed: %1The following filenames are not allowed: %1The following file extensions are not allowed: %1Checking rename permissions …You don't have the permission to rename this file. Please ask the author of the file to rename it.Failed to fetch permissions with error %1Filename contains leading and trailing spaces.Filename contains leading spaces.Filename contains trailing spaces.Use invalid nameFilename contains illegal characters: %1Could not rename file. Please make sure you are connected to the server.Cannot rename file because a file with the same name does already exist on the server. Please pick another name.Could not rename local file. %1OCC::LegalNoticeLegal noticeClose<p>Copyright 2017-2023 Nextcloud GmbH<br />Copyright 2012-2023 ownCloud GmbH</p><p>Licensed under the GNU General Public License (GPL) Version 2.0 or any later version.</p>OCC::LogBrowserLog OutputThe client can write debug logs to a temporary folder. These logs are very helpful for diagnosing problems.
Since log files can get large, the client will start a new one for each sync run and compress older ones. It will also delete log files after a couple of hours to avoid consuming too much disk space.
If enabled, logs will be written to %1Enable logging to temporary folderThis setting persists across client restarts.
Note that using any logging command line options will override this setting.Open folderOCC::LoggerError<nobr>File "%1"<br/>cannot be opened for writing.<br/><br/>The log output <b>cannot</b> be saved!</nobr>OCC::Mac::FileProviderEditLocallyJobCould not start editing locally.An error occurred during setup.Could not find a file for local editing. Make sure its path is valid and it is synced locally.Could not get file ID.Could not get file identifier.The file identifier is empty.OCC::NSISUpdaterNew Version Available<p>A new version of the %1 Client is available.</p><p><b>%2</b> is available for download. The installed version is %3.</p>Skip this timeGet updateUpdate Failed<p>A new version of the %1 Client is available but the updating process failed.</p><p><b>%2</b> has been downloaded. The installed version is %3. If you confirm restart and update, your computer may reboot to complete the installation.</p>Ask again laterRestart and updateUpdate manuallyOCC::NetworkSettingsProxy SettingsNo ProxyUse system proxySpecify proxy manually asHostProxy server requires authenticationNote: proxy settings have no effects for accounts on localhostManually specify proxyNo proxyUse global settingsDownload BandwidthNo limitKBytes/sLimit toLimit to 3/4 of estimated bandwidthLimit automaticallyUpload BandwidthHostname of proxy serverUsername for proxy serverPassword for proxy serverHTTP(S) proxySOCKS5 proxyOCC::OCUpdaterNew %1 update readyA new update for %1 is about to be installed. The updater may ask for additional privileges during the process. Your computer may reboot to complete the installation.Downloading %1 …Downloading %1. Please wait …%1 available. Restart application to start the update.Could not download update. Please open <a href='%1'>%1</a> to download the update manually.Could not download update. Please open %1 to download the update manually.Could not check for new updates.New %1 is available. Please open <a href='%2'>%2</a> to download the update.New %1 is available. Please open %2 to download the update.Checking update server …Update status is unknown: Did not check for new updates.No updates available. Your installation is at the latest version.Update CheckOCC::OwncloudAdvancedSetupPageConnectUse &virtual files instead of downloading content immediately %1(experimental)Virtual files are not supported for Windows partition roots as local folder. Please choose a valid subfolder under drive letter.%1 folder "%2" is synced to local folder "%3"Sync the folder "%1"Warning: The local folder is not empty. Pick a resolution!%1 gets replaced with the size and a matching unit. Example: 3 MB or 5 GB%1 free spaceVirtual files are not available for the selected folderLocal Sync Folder(%1)There isn't enough free space in the local folder!OCC::OwncloudConnectionMethodDialogConnection failed<html><head/><body><p>Failed to connect to the secure server address specified. How do you wish to proceed?</p></body></html>Select a different URLRetry unencrypted over HTTP (insecure)Configure client-side TLS certificate<html><head/><body><p>Failed to connect to the secure server address <em>%1</em>. How do you wish to proceed?</p></body></html>OCC::OwncloudHttpCredsPage&EmailConnect to %1Enter user credentialsOCC::OwncloudPropagatorError with the metadata. Getting unexpected metadata format.Impossible to get modification time for file in conflict %1OCC::OwncloudSetupPage%1 will be replaced with the application nameThe link to your %1 web interface when you open it in the browser.&Next >Server address does not seem to be validCould not load certificate. Maybe wrong password?OCC::OwncloudSetupWizard<font colour="green">Successfully connected to %1: %2 version %3 (%4)</font><br/><br/>Invalid URLFailed to connect to %1 at %2:<br/>%3Timeout while trying to connect to %1 at %2.Trying to connect to %1 at %2 …The authenticated request to the server was redirected to "%1". The URL is bad, the server is misconfigured.Access forbidden by server. To verify that you have proper access, <a href="%1">click here</a> to access the service with your browser.There was an invalid response to an authenticated WebDAV requestLocal sync folder %1 already exists, setting it up for sync.<br/><br/>Creating local sync folder %1 …OKfailed.Could not create local folder %1No remote folder specified!Error: %1creating folder on Nextcloud: %1Remote folder %1 created successfully.The remote folder %1 already exists. Connecting it for syncing.The folder creation resulted in HTTP error code %1The remote folder creation failed because the provided credentials are wrong!<br/>Please go back and check your credentials.</p><p><font colour="red">Remote folder creation failed probably because the provided credentials are wrong.</font><br/>Please go back and check your credentials.</p>Remote folder %1 creation failed with error <tt>%2</tt>.A sync connection from %1 to remote directory %2 was set up.Successfully connected to %1!Connection to %1 could not be established. Please check again.Folder rename failedCannot remove and back up the folder because the folder or a file in it is open in another program. Please close the folder or file and hit retry or cancel the setup.<font colour="green"><b>Local sync folder %1 successfully created!</b></font>OCC::OwncloudWizardAdd %1 accountSkip folders configurationCancelEnable experimental feature?When the "virtual files" mode is enabled no files will be downloaded initially. Instead, a tiny "%1" file will be created for each file that exists on the server. The contents can be downloaded by running these files or by using their context menu.
The virtual files mode is mutually exclusive with selective sync. Currently unselected folders will be translated to online-only folders and your selective sync settings will be reset.
Switching to this mode will abort any currently running synchronization.
This is a new, experimental mode. If you decide to use it, please report any issues that come up.Enable experimental placeholder modeStay safeOCC::PasswordInputDialogPassword for share requiredPlease enter a password for your share:OCC::PollJobInvalid JSON reply from the poll URLOCC::ProcessDirectoryJobSymbolic links are not supported in syncing.File is listed on the ignore list.File names ending with a period are not supported on this file system.File names containing the character "%1" are not supported on this file system.File name contains at least one invalid characterThe file name is a reserved name on this file system.name of folder entity to use when warning about invalid nameFoldername of folder entity to use when warning about invalid nameFilefolder or file impossible to sync due to an invalid name, placeholders will be file or folder and the invalid character%1 name containing the character "%2" is not supported on this file system.%1 name contains at least one invalid character%1 name is a reserved name on this file system.Filename contains trailing spaces.Filename contains leading spaces.Filename contains leading and trailing spaces.Filename is too long.File/Folder is ignored because it's hidden.Stat failed.Conflict: Server version downloaded, local copy renamed and not uploaded.Case Clash Conflict: Server file downloaded and renamed to avoid clash.The filename cannot be encoded on your file system.The filename is blacklisted on the server.Reason: the entire filename is forbidden.Reason: the filename has a forbidden base name (filename start).Reason: the file has a forbidden extension (.%1).Reason: the filename contains a forbidden character (%1).File has extension reserved for virtual files.sizepermissionfile idServer reported no %1Cannot sync due to invalid modification timeCould not upload file, because it is open in "%1".Error while deleting file record %1 from the databaseConflict when uploading a folder. It's going to get cleared!Conflict when uploading a file. It's going to get removed!Moved to invalid target, restoringIgnored because of the "choose what to sync" blacklistNot allowed because you don't have permission to add subfolders to that folderNot allowed because you don't have permission to add files in that folderNot allowed to upload this file because it is read-only on the server, restoringNot allowed to remove, restoringError while reading the databaseServer replied with an error while reading directory "%1" : %2OCC::PropagateDirectorycould not delete file %1 from local DBError updating metadata due to invalid modification timeThe folder %1 cannot be made read-only: %2Error updating metadata: %1File is currently in useOCC::PropagateDownloadFilecould not get file %1 from local DBFile %1 cannot be downloaded because encryption information is missing.File has changed since discoveryCould not delete file record %1 from local DBFile %1 can not be downloaded because of a local file name clash!The download would reduce free local disk space below the limitFree space on disk is less than %1File was deleted from serverThe file could not be downloaded completely.The downloaded file is empty, but the server said it should have been %1.File %1 has invalid modified time reported by server. Do not save it.File %1 downloaded but it resulted in a local file name clash!Error updating metadata: %1The file %1 is currently in useOCC::PropagateItemJob; Restoration Failed: %1A file or folder was removed from a read only share, but restoring failed: %1OCC::PropagateLocalMkdircould not delete file %1, error: %2Folder %1 cannot be created because of a local file or folder name clash!Could not create folder %1The folder %1 cannot be made read-only: %2Error updating metadata: %1The file %1 is currently in useOCC::PropagateLocalRemoveCould not remove %1 because of a local file name clashCould not delete file record %1 from local DBOCC::PropagateLocalRenameFolder %1 cannot be renamed because of a local file or folder name clash!File %1 downloaded but it resulted in a local file name clash!could not get file %1 from local DBError setting pin stateError updating metadata: %1The file %1 is currently in useCould not delete file record %1 from local DBFailed to propagate directory rename in hierarchyFailed to rename fileOCC::PropagateRemoteDeleteWrong HTTP code returned by server. Expected 204, but received "%1 %2".Could not delete file record %1 from local DBOCC::PropagateRemoteDeleteEncryptedRootFolderWrong HTTP code returned by server. Expected 204, but received "%1 %2".OCC::PropagateRemoteMkdirWrong HTTP code returned by server. Expected 201, but received "%1 %2".Failed to encrypt a folder %1Error writing metadata to the database: %1The file %1 is currently in useOCC::PropagateRemoteMoveCould not rename %1 to %2, error: %3Error updating metadata: %1The file %1 is currently in useWrong HTTP code returned by server. Expected 201, but received "%1 %2".could not get file %1 from local DBCould not delete file record %1 from local DBError setting pin stateError writing metadata to the databaseOCC::PropagateUploadFileCommonFailed to upload encrypted file.File %1 cannot be uploaded because another file with the same name, differing only in case, existsUpload of %1 exceeds the quota for the folderFile %1 has invalid modification time. Do not upload to the server.File Removed (start upload) %1Local file changed during syncing. It will be resumed.Local file changed during sync.Failed to unlock encrypted folder.Unable to upload an item with invalid charactersError updating metadata: %1The file %1 is currently in useOCC::PropagateUploadFileNGThe local file was removed during sync.Local file changed during sync.Poll URL missingUnexpected return code from server (%1)Missing File ID from serverMissing ETag from serverOCC::PropagateUploadFileV1Poll URL missingThe local file was removed during sync.Local file changed during sync.The server did not acknowledge the last chunk. (No e-tag was present)OCC::ProxyAuthDialogProxy authentication requiredUsername:Proxy:The proxy server needs a username and password.Password:OCC::SelectiveSyncDialogChoose What to SyncOCC::SelectiveSyncWidgetLoading …Deselect remote folders you do not wish to synchronise.NameSizeNo subfolders currently on the server.An error occurred while loading the list of sub folders.OCC::ServerNotificationHandlerReplyDismissOCC::SettingsDialogSettingsThis name refers to the application name e.g Nextcloud%1 SettingsGeneralNetworkAccountOCC::ShareManagerErrorOCC::ShareModelSecure file drop linkShare linkLink shareInternal linkSecure file dropCould not find local folder for %1Enter a note for the recipientOCC::ShareeModelSearch globallyNo results foundGlobal search resultssharee (shareWithAdditionalInfo)%1 (%2)OCC::SocketApiFailed to encrypt folder at "%1"The account %1 does not have end-to-end encryption configured. Please configure this in your account settings to enable folder encryption.Failed to encrypt folderCould not encrypt the following folder: "%1".
Server replied with error: %2Folder encrypted successfullyThe following folder was encrypted successfully: "%1"Context menu shareSelect new location …I shared something with youShare optionsActivityCopy private link to clipboardSend private link by email …Leave this shareResharing this file is not allowedResharing this folder is not allowedCopy secure file drop linkCopy public linkCopy secure filedrop linkCopy internal linkEncryptLock fileUnlock fileLocked by %1remaining time before lock expiresExpires in %1 minutesExpires in %1 minutesEditOpen in browserResolve conflict …Move and rename …Move, rename and upload …Delete local changesMove and upload …DeleteOCC::SslButton<h3>Certificate Details</h3>Common Name (CN):Subject Alternative Names:Organization (O):Organizational Unit (OU):State/Province:Country:Serial:<h3>Issuer</h3>Issuer:Issued on:Expires on:<h3>Fingerprints</h3>SHA-256:SHA-1:<p><b>Note:</b> This certificate was manually approved</p>%1 (self-signed)%1This connection is encrypted using %1 bit %2.
This connection is NOT secure as it is not encrypted.
Server version: %1No support for SSL session tickets/identifiersCertificate information:The connection is not secureOCC::SslErrorDialogTrust this certificate anywayUntrusted CertificateCannot connect securely to <i>%1</i>:Additional errors:with Certificate %1<not specified>Organisation: %1Unit: %1Country: %1Fingerprint (SHA1): <tt>%1</tt>Fingerprint (SHA-256): <tt>%1</tt>Fingerprint (SHA-512): <tt>%1</tt>Effective Date: %1Expiration Date: %1Issuer: %1OCC::SyncEngine%1 (skipped due to earlier error, trying again in %2)Could not update file: %1Could not update virtual file metadata: %1Could not update file metadata: %1Could not set file record to local DB: %1Unresolved conflict.Placeholders are postfixed with file sizes using Utility::octetsToString()Only %1 are available, need at least %2 to startUnable to open or create the local sync database. Make sure you have write access in the sync folder.Using virtual files with suffix, but suffix is not setUnable to read the blacklist from the local databaseUnable to read from the sync journal.Cannot open the sync journalDisk space is low: Downloads that would reduce free space below %1 were skipped.There is insufficient space available on the server for some uploads.OCC::SyncStatusSummaryOfflineAll synced!Some files couldn't be synced!See below for errorsChecking folder changesSyncing changesSync pausedSome files could not be synced!See below for warningsSyncing%1 of %2 · %3 left%1 of %2Syncing file %1 of %2OCC::SystrayDownloadAdd accountOpen main dialoguePause syncResume syncSettingsHelpExit %1Pause sync for allResume sync for all%1: %2OCC::ThemeExample text: "<p>Nextcloud Desktop Client</p>" (%1 is the application name)<p>%1 Desktop Client</p>Example text: "<p>Nextcloud Desktop Client</p>" (%1 is the application name)<p>%1 Desktop Client</p><p>Version %1. For more information please click <a href='%2'>here</a>.</p><p><small>Using virtual files plugin: %1</small></p>Example text: "<p>Nextcloud Desktop Client</p>" (%1 is the application name)<p>%1 desktop client %2</p><p>Version %1. For more information please click <a href='%2'>here</a>.</p><p>This release was supplied by %1.</p>OCC::UnifiedSearchResultsListModelFailed to fetch providers.Failed to fetch search providers for '%1'. Error: %2Search has failed for '%2'.Search has failed for '%1'. Error: %2OCC::UpdateE2eeFolderMetadataJobFailed to update folder metadata.Failed to unlock encrypted folder.Failed to finalize item.OCC::UpdateE2eeFolderUsersMetadataJobError updating metadata for a folder %1Could not fetch public key for user %1Could not find root encrypted folder for folder %1Unable to add or remove user %1 from accessing folder %2.Failed to unlock a folder.OCC::User%1 notificationsRetry all uploadsResolve conflictRename fileOpen Nextcloud Assistant in browserOpen Nextcloud Talk in browserOCC::UserModelConfirm Account Removal<p>Do you really want to remove the connection to the account <i>%1</i>?</p><p><b>Note:</b> This will <b>not</b> delete any files.</p>Remove connectionCancelOCC::UserStatusSelectorModelCould not fetch predefined statuses. Make sure you are connected to the server.Could not fetch status. Make sure you are connected to the server.Status feature is not supported. You will not be able to set your status.Emojis are not supported. Some status functionality may not work.Could not set status. Make sure you are connected to the server.Could not clear status message. Make sure you are connected to the server.Don't clear30 minutes1 hour4 hoursTodayThis weekLess than a minute1 minute%1 minutes%1 hours1 day%1 daysOCC::VfsThe Virtual filesystem feature requires a NTFS file system, %1 is using %2OCC::VfsDownloadErrorDialogDownload errorError downloadingcould not be downloaded> More detailsMore detailsError downloading %1%1 could not be downloaded.OCC::VfsSuffixError updating metadata due to invalid modification timeOCC::VfsXAttrError updating metadata due to invalid modification timeOCC::WebEnginePageInvalid certificate detectedThe host "%1" provided an invalid certificate. Continue?OCC::WebFlowCredentialsYou have been logged out of your account %1 at %2. Please login again.Please login with the account: %1OCC::WelcomePageFormLog inSign up with providerKeep your data secure and under your controlSecure collaboration & file exchangeEasy-to-use web mail, calendaring & contactsScreensharing, online meetings & web conferencesHost your own serverOCC::ownCloudGuiUnsupported Server VersionThe server on account %1 runs an unsupported version %2. Using this client with unsupported server versions is untested and potentially dangerous. Proceed at your own risk.DisconnectedDisconnected from some accountsDisconnected from %1Disconnected from accounts:Account %1: %2Please sign inSigned outAccount synchronisation is disabledSynchronisation is pausedFolder %1: %2Unresolved conflictsUp to dateError during synchronisationNo sync folders configuredExample text: "Nextcloud: Syncing 25MB (3 minutes left)" (%1 is the folder name to be synced, %2 a status message for that folder)%1: %2macOS VFS for %1: Sync is running.macOS VFS for %1: Last sync was successful.macOS VFS for %1: A problem was encountered.There are no sync folders configured.Checking for changes in remote "%1"Checking for changes in local "%1"Syncing %1 of %2 (%3 left)Syncing %1 of %2Syncing %1 (%2 left)Syncing %1%1 (%2, %3)OwncloudAdvancedSetupPage&Local FolderUsernameLocal FolderChoose different folderServer addressSync LogoSynchronize everything from serverAsk before syncing folders larger thanTrailing part of "Ask confirmation before syncing folder larger than" MBAsk before syncing external storagesChoose what to syncKeep local data<html><head/><body><p>If this box is checked, existing content in the local folder will be erased to start a clean sync from the server.</p><p>Do not check this if the local content should be uploaded to the servers folder.</p></body></html>Erase local folder and start a clean syncOwncloudHttpCredsPage&Username&PasswordOwncloudSetupPageTextLabelLogoServer addressThis is the link to your %1 web interface when you open it in the browser.QObjectNew folderFailed to create debug archiveCould not create debug archive in selected location!You renamed %1You deleted %1You created %1You changed %1Synced %1delay in days after an activity%nd%ndin the futuredelay in hours after an activity%nh%nhnowone minute after activity date and time1mdelay in minutes after an activity%nm%nmSome time agothis displays an error string (%2) for a file %1%1: %2Paths beginning with '#' character are not supported in VFS mode.ResolveConflictsDialogSolve sync conflictsindicate the number of conflicts to resolve%1 files in conflict%1 files in conflictChoose if you want to keep the local version, server version, or both. If you choose both, the local file will have a number added to its name.All local versionsAll server versionsResolve conflictsCancelShareDelegateCreate a new share linkCopy share link locationCopied!Share optionsShareDetailsPageAn error occurred setting the share password.Edit shareDismissShare labelAllow upload and editingView onlyFile drop (upload only)Allow resharingHide downloadPassword protectSet expiration dateNote to recipientUnshareAdd another linkShare link copied!Copy share linkShareViewPassword required for new shareShare passwordSharing is disabledThis item cannot be shared.Sharing is disabled.ShareeSearchFieldSearch for users or groups…Sharing is not available for this folderSyncJournalDbFailed to connect database.SyncStatusSync nowResolve conflictsTalkReplyTextFieldReply to …Send reply to chat messageTrayFoldersMenuButtonOpen local or group foldersOpen local folderConnectedDisconnectedGroup folder buttonOpen local folder "%1"Open group folder "%1"Open %1 in file explorerUser group and local folders menuUnifiedSearchInputContainerSearch files, messages, events …UnifiedSearchResultFetchMoreTriggerLoad more resultsUnifiedSearchResultItemSkeletonSearch result skeleton.UnifiedSearchResultListItemLoad more resultsUnifiedSearchResultNothingFoundNo results forUnifiedSearchResultSectionItemSearch results section %1UserLineSwitch to accountCurrent account status is onlineCurrent account status is do not disturbAccount actionsSet statusLog outLog inRemove accountUserStatusSelectorOnline statusOnlineAwayDo not disturbMute all notificationsInvisibleAppear offlineStatus messageWhat is your status?Clear status message afterCancelClear status messageSet status messageUtility%L1 B%L1 TB%L1 GB%L1 MB%L1 KB%n year%n years%n month%n months%n day%n days%n hour%n hours%n minute%n minutes%n second%n seconds%1 %2ValidateChecksumHeaderThe checksum header is malformed.The checksum header contained an unknown checksum type "%1"The downloaded file does not match the checksum, it will be resumed. "%1" != "%2"main.cppSystem Tray not available%1 requires on a working system tray. If you are running XFCE, please follow <a href="http://docs.xfce.org/xfce/xfce4-panel/systray">these instructions</a>. Otherwise, please install a system tray application such as "trayer" and try again.nextcloudTheme::aboutInfo()<p><small>Built from Git revision <a href="%1">%2</a> on %3, %4 using Qt %5, %6</small></p>progressVirtual file createdReplaced by virtual fileDownloadedUploadedServer version downloaded, copied changed local file into conflict fileServer version downloaded, copied changed local file into case conflict conflict fileDeletedMoved to %1IgnoredFilesystem access errorErrorUpdated local metadataUpdated local virtual files metadataUnknowndownloadingDownloadinguploadingUploadingdeletingDeletingmovingMovingignoringIgnoringerrorupdating local metadataUpdating local metadataUpdating local virtual files metadatathemeStatus undefinedWaiting to start syncSync status is unknownWaiting to start syncingSync is runningSync SuccessSync Success, some files were ignored.Sync was successfulSync ErrorSync was successful but some files were ignoredSetup ErrorError occurred during syncError occurred during setupPreparing to syncAborting …Stopping syncSync is pausedutilityCould not open browserThere was an error when launching the browser to go to URL %1. Maybe no default browser is configured?Could not open email clientThere was an error when launching the email client to create a new message. Maybe no default email client is configured?Always available locallyCurrently available locallySome available online onlyAvailable online onlyMake always available locallyFree up local spaceOCC::AbstractPropagateRemoteDeleteEncryptedWrong HTTP code returned by server. Expected 204, but received "%1 %2"."%1 Failed to unlock encrypted folder %2".OCC::OAuthError returned from the server: <em>%1</em>There was an error accessing the "token" endpoint: <br><em>%1</em>Empty JSON from OAuth2 redirectCould not parse the JSON returned from the server: <br><em>%1</em>The reply from the server did not contain all expected fields<h1>Login Error</h1><p>%1</p><h1>Wrong account</h1><p>You logged in with the account <em>%1</em>, but must log in with the account <em>%2</em>.<br>Please log out of %3 in another tab, then <a href='%4'>click here</a> and log in with %2.</p>OCC::OwncloudOAuthCredsPageConnect to %1Login in your browserOCC::ShareUserLineUsernameCan editNote:Password:Expires:OwncloudOAuthCredsPagePlease switch to your browser to proceed.An error occurred while connecting. Please try again.Re-open BrowserCopy linkWindowNextcloud desktop main dialogueCurrent accountResume sync for allPause sync for allAdd accountAdd new accountSettingsExitCurrent account avatarCurrent account status is onlineCurrent account status is do not disturbAccount switcher and settings menuOpen Nextcloud Talk in browserMore appsOpen %1 in browserUnified search results listnextcloudTheme::about()<p><small>Built from Git revision <a href="%1">%2</a> on %3, %4 using Qt %5, %6</small></p>