The menu can be open with the keyboard shortcut.
(Fixup for the fix of #5596)
Also use popup instead of exec to show the menu: it's safer as it does
not re-enter the event loop.
Previously we required matching mtimes but that's actually
unnecessary when the question is about whether to skip the
download. We will still update the file's metadata.
Also, adjust behavior when the checksum is weak (Adler32):
in these cases we still depend on equal mtimes.
Some servers have non-compliant instance ids (that start with a number)
and thereby make deducing the numeric file id from the full id
unreliable.
To circumvent this problem we retrieve the fileid property from the
server with a PROPFIND.
This restores 2.3 behavior. Some servers reply 404 to GETs and PROPFINDs
to the remote.php/webdav/ url and used to work. Being more picky would
break them.
The assert was made fatal when looking at asserts for #5429#5518
without having a particular problem in mind. Recent reports weakly
suggest that this might lead to occasional crashes for users when
sqlite_close fails in ways that look ignorable.
This is important as a lot of the code would start
to rely in direct access to the client side encryption
and there are different keys for different accounts.
With some firewalls we can't GET /remote.php/webdav/. Here we keep the
GET request to detect shibboleth through the redirect pattern but then
use PROPFIND to figure out the http auth method.
Currently we prefer OAuth to Shibboleth to Basic auth.
This also restores the fallback behavior of assuming basic auth
when no auth type can be determined.
It appears that Qt implementation of the DELETE http request
does not send bodyData, and we need that for Nextcloud.
Currently I changed the http request on the server side
to accept a POST instead of a DELETE, so I can actually
develop.
Also, I already poked the Qt developers that did this code.
Also, commented out the finalization of the decrypt operation
because that was messing with the encryption. There's something
wrong here but I need to get this working and I can fix stuff
later.
For historical reasons CheckServerJob doesn't just check url/ but also
url/owncloud/. However, that means if url/status.php is a 404 and
url/owncloud/status.php is a 404, the user will see the latter url
appear in the error message. That's potentially confusing.
Instead, just show the account url which will be closer to what the
user typed into the account wizard, while being adjusted for protocol
and possible redirects.
* Do not use AAD
* Do not try to decrypt the last 16 bytes as Android adds the tag there
by default
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
* Do not use padding
* Do not use the ADD data
* Append the tag to the ciphertext to be compatible with Android
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
This allow the sync engine to query the new metadata and update the
overlay icons.
Note: we also need to invalidate the etags because the server does not
change the etag of parent directories that see their share-types changed.
Issue #6098
... even if the file is not changed.
We get an UPDATE_METADATA in that case, so make sure we let the
SyncFileStatusTracker know about it.
That means we need to filter out UPDATE_METADATA in the other listeners
of this signal.
Issue #6098
When users share the same tree several times (say A/ and A/B/ are both
shared) the remote tree can have several entries that have the same
file id. This needs to be respected in rename detection.
Also adds several tests and fixes for issues noticed during testing.
See #6096
We mostly trust the file watchers meaning that we don't re-scan the
local tree if we have done that recently and no file watcher events
have arrived. If the file watchers invalidate a subtree, we rescan
only that subtree.
Since we're not entirely sure the file watchers are reliable, we still
do full local discoveries regularly (1h by default). There is a config
file setting as well as an environment variable to control the interval.
Add state and signal to catch the following two known problems:
* Linux: inotify user watch pool is exhausted. Folder watcher becomes
unreliable.
* Windows: buffer is too small, some notifications are lost but watching
stays reliable.
This makes it unnecessary for FolderMan to manage the list and removes
the need for some forwarders.
This is done in preparation for follow-up commits that want to add
diagnostics to FolderWatcher that shall be available from within Folder.
Unfortunately checking the base-url for redirects in all cases lead
to incorrect behavior in some SAML/OAuth2 edge cases.
This new iteration checks the base url for redirects only if the
standard CheckServerJob can't reach the server. That way the 2.3
behavior is only changed in cases that would have lead to errors.
See #5954
Issue #6105
Dynamically find the browser trough topLevelWidgets instead of
forwarding the call to the relevant page as it would require to break
many abstration layers (OwncloudSetupWizard -> OwncloudWizard ->
AbstractCredentialsWizardPage -> OwncloudShibbolethCredsPage)
And considering that we want to phase shibboleth down, I tought is
was not worth adding an interface for this.
The OAuth page don't have this problem because it shows a label and
allow the user to re-open the browser.
For some reason, this was working untill I added a call
to X509_REQ_get_subject_name, then the linking suddenly
stopped working (even tougth I'm using a ton of other
OpenSSL calls)
Force to link against 1.0
This network job does a DELETE http request on a URL. It's the
second class that does basically the same, but this one returns
the http return code, and it's set to do a api call.
If the server supports client syde encryption, display
a menu on right click that should display encrypt and decrypt.
ideally it would show the encrypt if the folder is decrypted, and
decrypt if the folder is encrypted but currently there's no way
for the client to know that.
We did not set a log handler so there were no timestamps.
The --debug didn't have an effect, let's use --logdebug like in GUI version.
(Command line always outputs some log)
Found in owncloud/documentation#3436
The issues tab uses custom ordering where overall and summary sync
issues are displayed first. This ordering is preserved by creating
special sorting logic for the "time" column.
It needed special handling anyway, since sorting by time-string would
have yielded incorrect results.
Previously it could only display synchronization progress or "up to
date". Now it also communicates the same overall state that the icon
shows.
See owncloud/enterprise#2134
Comparison of file sizes for potential conflicts was added in
0eb9401c62, but did not extend to checking
the file size in case of potential local moves.
This commit adds this check and adds tests for various move+change
scenarios.
On Mac, this halves the time spent in csync_excluded_traversal
when using check_csync_excluded_performance. A similar performance
increase is seen on linux.
Fix performence regression from commit d66c2b5fae
For every new file we would look up every parent directories. Allocating
a new QByteArreay for every parent riectory just to know if it is in the other
tree is wasting lots of CPU.
Use a ByteArrayRef trick, similar to QStringRef
To reproduce, log in and click "authorize" on the browser, then close
the browser before the client has replied, (but after redirected to localhost,
i.e. when the client is asking the server for the token)
The problem is that socket can be destroyed so we don't need to answer on a
destroyed socket.
This gets rid of the csync_statedb sqlite layer and use
the same code and same connection as the rest of the SyncEngine.
Missing functions are added to SyncJournalDb and change a few minor
things (like changing SyncJournalFileRecord::_modtime to be an int64
instead of a QDateTime, like it was in csync).
The current implementation would return the same value whether the query failed
or if no row would be found. This is something that is currently checked by csync
and needs to be provided if we want to use SyncJournalDB there.
Adjusted all call sites to also check the return value even though they
could still just rely on rec.isValid(), but makes it more explicit as to what
happens for database errors in those cases, if we ever want to gracefully handle
them.
We need to use concatPath to avoid possible double '/' in the URLs if the
account url() ends with '/'.
This has become even more of a problem since commit
d1b8370a4a which was resolving the url after
a redirect where most server actually add a '/' if the url is a folder
For the remote this was already done long time ago
For windows, this was already partially done
The goal is to avoid needless conversion of the path to local encoding.
Create a specific type that parses the permissions so we can store
it in a short rather than in a QByteArray
Note: in RemotePermissions::toString, we make sure the string is not
empty by adding a space, this was already existing before commit
e8f7adc7ca where it was removed by mistake.
Some slot were protected or private but needed to be public.
Some needed a static_cast (can't use qOverload because it is in Qt 5.7)
This is not only a partial change.
This is motivated by the fact that QMetaObject::noralizeSignature takes 7.35%
CPU of the LargeSyncBench. (Mostly from ABstractNetworkJob::setupConnections and
PropagateUploadFileV1::startNextChunk). It could be fixed by using normalized
signature in the connection statement, but i tought it was a good oportunity
to modernize the code.
This commit only contains calls that were automatically converted with clazy.
Set OWNCLOUD_UPLOAD_CONFLICT_FILES=1 to trigger this behavior.
Note that this is experimental and unsupported. The real feature is
likely to end up in 2.5.
Uploading conflict files is simply done by removing the pattern from
csync_exclude. The rest here deals with making the conflict notification
ui approximately work.
There are still some concerns about where an uploaded conflict file
appears in the sync protocol and issues list (it should be in both, but
is only in one of them currently!).
See #4557.
