This was done because the propagator jobs where running in a thread a long
time ago, but this is no longer the case.
(Also QAtomicInt::load is marked as deprecated now)
Instead of all at once, to reduce peak memory use.
Changing UploadDevice in this way requires keeping the file open for the
duration of the upload. It also means changes to open(), seek(), close()
to ensure that uses of the device work right when a request needs to
be resent.
If the server does not set the mtime, it is not a big problem for the
synchronisation.
The test was used before so we could do a PROPPATCH for server that did not
support this header. But now that all server supports that we don't need to
to the check. (We do not do the PROPPATCH since we got rid of the neon
dependency)
Apparently, it may happen that some backend don't support setting mtime
and this can lead to this error.
https://github.com/owncloud/client/issues/6797
Issue #6420
Store the X-Request-ID in the SyncFileItem and also in the blacklist.
Note that for consistency reason, the X-Request-ID is also in the
SyncFileItem if the request succeeds.
Currently there is no UI to access it, but it can be queried with sql
commands
This is about the conflicts that happens when the file has been uploaded
correctly to the server, but the etag was not recieved because the connection
was closed before we got the reply.
We used to compare only the mtime when comparing the uploaded file and the
existing file. However, to be perfectly correct, we also should check the
size.
This was found because TestChunkingNG::connectionDroppedBeforeEtagRecieved is
flaky. Example of faillure found in https://drone.owncloud.com/owncloud/client/481/5
while testing PR #6626
(very trimmed log:)
06-29 07:58:02:015 [ info sync.csync.csync ]: ## Starting local discovery ##
06-29 07:58:02:016 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: <-> 1644a8c8750, inode: 1935629 <-> 1935629, size: 301 <-> 300, perms: 0 <-> ff, type: 0 <-> 0, checksum: <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:016 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:972 [ warning sync.networkjob ]: QNetworkReply::NetworkError(OperationCanceledError) "Connection timed out" QVariant(Invalid)
.. next sync...
06-29 07:58:02:980 [ info sync.engine ]: #### Discovery start ####################################################
06-29 07:58:02:981 [ info sync.csync.csync ]: ## Starting local discovery ##
06-29 07:58:02:983 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: <-> 1644a8c8750, inode: 1935629 <-> 1935629, size: 302 <-> 300, perms: 0 <-> ff, type: 0 <-> 0, checksum: <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:983 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:985 [ info sync.csync.csync ]: ## Starting remote discovery ##
06-29 07:58:02:985 [ info sync.networkjob ]: OCC::LsColJob created for "http://localhost/owncloud" + "" "OCC::DiscoverySingleDirectoryJob"
06-29 07:58:02:987 [ info sync.csync.updater ]: Database entry found, compare: 1530259082 <-> 1530259051, etag: 1644a8c8b26 <-> 1644a8c8750, inode: 0 <-> 1935629, size: 301 <-> 300, perms: ff <-> ff, type: 0 <-> 0, checksum: SHA1:5adcdac9608ae0811247f07f4cf1ab0a2ef99154 <-> SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1, ignore: 0
06-29 07:58:02:987 [ info sync.csync.updater ]: file: A/a0, instruction: INSTRUCTION_EVAL <<=
06-29 07:58:02:989 [ info sync.csync.csync ]: Update detection for remote replica took 0.004 seconds walking 13 files
06-29 07:58:02:990 [ info sync.engine ]: #### Discovery end #################################################### 9 ms
06-29 07:58:02:990 [ info sync.database ]: Updating file record for path: "A/a0" inode: 1935629 modtime: 1530259082 type: 0 etag: "1644a8c8b26" fileId: "16383ea4" remotePerm: "WDNVCKR" fileSize: 301 checksum: "SHA1:cc9adedebe27a6259efb8d6ed09f4f2eff559ad1"
06-29 07:58:02:990 [ info sync.csync.reconciler ]: INSTRUCTION_UPDATE_METADATA client file: A/a0
06-29 07:58:02:990 [ info sync.csync.csync ]: Reconciliation for local replica took 0 seconds visiting 13 files.
06-29 07:58:02:990 [ info sync.csync.reconciler ]: INSTRUCTION_UPDATE_METADATA server dir: A
06-29 07:58:02:990 [ info sync.csync.csync ]: Reconciliation for remote replica took 0 seconds visiting 13 files.
06-29 07:58:02:990 [ info sync.engine ]: #### Reconcile end #################################################### 9 ms
06-29 07:58:02:990 [ info sync.database ]: Updating local metadata for: "A/a0" 1530259082 302 1935629
FAIL! : TestChunkingNG::connectionDroppedBeforeEtagRecieved(small file) '!fakeFolder.syncOnce()' returned FALSE. ()
Some servers have virus scanners and the like that can delay the
response of the final chunked upload assembly significantly, often
breaking the current 5min (!) timeout. See owncloud/enterprise#2480
for details.
Previously it tried to abort even jobs that had already finished, which
was not going to work as they wouldn't emit finished() again.
Also, in some cases the abortCount would never go to zero and that case
wasn't well documented.
Since commit 4dc49ff3, we store an entry in the upload info table even
for non chunked uploads. However, if this fails we don't want to remove
non-existant stale chunks if the upload fails.
Without this commit, we would send a DELETE command to clean non-existant
chunks in the dav/uploads/ namespace.
This can happen if the upload of a file is finished, but we just got
disconnected right before recieving the reply containing the etag.
So nothing was save din the DB, and we are not sure if the server
recieved the file properly or not. Further local update of the file
will cause a conflict.
In order to fix this, store the checksum of the uploading file in
the uploadinfo table of the local db (even if there is no chunking
involved). And when we have a conflict, check that it is not because
of this situation by checking the entry in the uploadinfo table.
Issue #5106
Add a new member for the UploadFileInfo in PropagateUploadCommon
to hold the full file path - as it can change if we use a temporary
file to upload.
Adapt propagateuploadv1 to use the new calls.
This gets rid of the csync_statedb sqlite layer and use
the same code and same connection as the rest of the SyncEngine.
Missing functions are added to SyncJournalDb and change a few minor
things (like changing SyncJournalFileRecord::_modtime to be an int64
instead of a QDateTime, like it was in csync).
This is motivated by the fact that QMetaObject::noralizeSignature takes 7.35%
CPU of the LargeSyncBench. (Mostly from ABstractNetworkJob::setupConnections and
PropagateUploadFileV1::startNextChunk). It could be fixed by using normalized
signature in the connection statement, but i tought it was a good oportunity
to modernize the code.
This commit only contains calls that were automatically converted with clazy.
Now that csync builds as C++, this will avoid having to implement
functionalities needed by csync mandatorily in csync itself.
This library is built as part of libocsync and symbols exported
through it.
This requires a relicense of Utility as LGPL. All classes moved into
this library from src/libsync will need to be relicensed as well.
* For conflicts where mtime and size are identical:
a) If there's no remote checksum, skip (unchanged)
b) If there's a remote checksum that's a useful hash, create a
PropagateDownload job and compute the local hash. If the hashes
are identical, don't download the file and just update metadata.
* Avoid exposing the existence of checksumTypeId beyond the database
layer. This makes handling checksums easier in general because they
can usually be treated as a single blob.
This change was prompted by the difficulty of producing file_stat_t
entries uniformly from PROPFINDs and the database.
Use qCInfo for anything that has general value for support and
development. Use qCWarning for any recoverable error and qCCritical
for anything that could result in data loss or would identify a serious
issue with the code.
Issue #5647
This gives more insight about the logs and allow setting fine-tuned
logging rules. The categories are set to only output Info by default
so this allows us to provide more concise logging while keeping the
ability to extract more information for a specific category when
developping or debugging customer issues.
Issue #5647
By default QNetworkReply::errorString() often produces messages like
"Error downloading <url> - server replied: <reason>"
but the "downloading" part invariably confuses people since the
error might very well have been produced by a PUT request.
This commit produces clearer error messages for HTTP errors.
Additionally:
* Remove some unnecessary null checks from slots connected to
network job signals and document that these signals never send
null replies.
* There was a bug where AbstractNetworkJob::_timedout wasn't
set when derived classes overrode slotTimeout. We now ensure
it's always set by disallowing overrides of slotTimeout.
Instead it now calls onTimedOut, which allows custom handling.
* Several subclasses declared errorString, isTimedOut. Move
these to AbstractNetworkJob.
* Unify handling of OC-ErrorString (via the new, general
Job::errorString)
* Add documentation in various places.
Avoid using connections to report up the job tree for signals
that we can directly communicate to the OwncloudPropagator.
This slightly reduces the memory usage and avoid passing those calls
through the whole parent chain.
The test sets OWNCLOUD_MAX_PARALLEL to 1 to disable parallelism.
But since the max amount of parallelism is twice as much, that does not
work.
So change the way we compute the hardMaximumActiveJob: Use the value of
OWNCLOUD_MAX_PARALLEL to maximize this amount and base the maximum amount
of transfer jobs on it instead of the other way.
A result of this change is that, in case of bandwidth limit, we keep the
default of 6 non-transfer jobs in parallel. I believe that's fine since
the short jobs do not really use bandwidth, so we can still keep the same
amount of small jobs.
