If the PROPFIND return an invalid code (like 200) then we would
not recieve the error signal and we would never sync again.
Found while investigating https://github.com/owncloud/enterprise/issues/1068
The ".sys.admin#recall#" is the recall file and should not be ignored
even if hidden.
The remote discovery do not need to detect hidden files because it
is already detected by csync in all cases. So this avoid code duplication
Users have complained that they don't see the notification when it is
shown and are not aware that their files aren't syncing.
Remove the non-interactive credentials fetch logic and add make sure
that the shibboleth popup will flash in the taskbar instead.
This will still not allow the popup to show in front in all cases,
but this is a compromise that we have to chose.
This reverts commit dcb687929f.
Issue https://github.com/owncloud/enterprise/issues/990
This is the fix for issue #4370
Step to reproduce the bug:
1) have lots of files in directory "dir1"
2) do mkdir dir2 && mv dir1/* dir2
3) DURING the sync (which takes time because of the many moves) do mkdir dir3 && mv dir2/* dir3/
4) observe that files are PUT in the next sync
The problem is that SyncJournalFileRecord::SyncJournalFileRecord will fail to
get the inode after the forst move because the files are already moved on the
filesystem. Normaly it should use the inode from the discovery phase in that
case but that is not working because it comes from the remote node in case of
moves, so the code in SyncEngine::treewalkFile would not set the inode.
Test in https://github.com/owncloud/smashbox/pull/143
Added a new "chunkSize" entry in the General group of the owncloud.cfg
which can be set to the size, in bytes, of the chunks.
This allow user with hude bandwidth to select more optimal chunk size
Issue #4354
QFontMetrics::boundingRect doesn't return the right size for this
font size for some reason, while it works well if we remove the
smaller point size adjustment for the progress font.
To avoid having to debug the font system in Qt just increase the
existing +2px adjustment to +5px so that it renders fine.
Server older than 8.1 cannot cope with invalid char in the filename
so we must not send them from the client. We were already checking
for new files, but not for renames or new directories.
https://github.com/owncloud/enterprise/issues/1009
The height adjustment done to place the button in the middle of the
non-error area was only done for rendering. Make sure that we do the
same adjustment when mapping click events as well.
Also replace some wrong occurences of aliasMargin*2 for margin.
Previously we would fail to start if the directory was not existing.
This was working for relative directory, but it should also work for
absolute ones
https://github.com/owncloud/enterprise/issues/970
Use QT_DEVICE_PIXEL_RATIO=auto on Qt<=5.5 to enable automatic
scale factor settings on Windows. Also move the existing
Qt::AA_EnableHighDpiScaling logic to use the equivalent
QT_AUTO_SCREEN_SCALE_FACTOR=1 environment variable just to
keep the 5.5 and >=5.6 code at the same place.
* Ensure every time a file becomes a directory or the other way around
the item is flagged as INSTRUCTION_TYPE_CHANGE.
* Delete the badly-typed entity if necessary in the propagation jobs.
QPainter::drawText uses the top of the font for the y position of its
rect argument, but uses the baseline when using a point argument.
Also use the margin variable that matches the font used instead of
the aliasMargin and make sure that the margin is only added between
the box and the text once.
The Qt HTTP thread calls authenticationRequired (indirectly) using a
BlockingQueuedConnection. So when we call invalidateToken from slot
connected to this signal and end up calling QNAM::clearAccessCache which
waits on the thread for 5 seconds
Backtraces:
Qt HTTP thread:
#0 0x00007ffff20c707f in pthread_cond_wait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0c0b in QWaitConditionPrivate::wait
#2 QWaitCondition::wait
#3 0x00007ffff43ea06b in QSemaphore::acquire
#4 0x00007ffff45dcf6f in QMetaObject::activate
[...]
#9 0x00007ffff45dd607 in QMetaObject::activate
#10 0x00007ffff4edbaf7 in QHttpNetworkReply::authenticationRequired
#11 0x00007ffff4e0b2b4 in QHttpNetworkConnectionPrivate::handleAuthenticateChallenge
#12 0x00007ffff4e10753 in QHttpNetworkConnectionChannel::handleStatus
#13 0x00007ffff4e11cc9 in QHttpNetworkConnectionChannel::allDone
#14 0x00007ffff4e14605 in QHttpProtocolHandler::_q_receiveReply
Main Thread:
#0 0x00007ffff20c7428 in pthread_cond_timedwait@@GLIBC_2.3.2 ()
#1 0x00007ffff43f0b56 in QWaitConditionPrivate::wait_relative (time=5000, this=0x136c580)
#2 QWaitConditionPrivate::wait (time=5000, this=0x136c580)
#3 QWaitCondition::wait (this=this@entry=0x136c788, mutex=mutex@entry=0x136c760, time=time@entry=5000)
#4 0x00007ffff43efa6e in QThread::wait (this=<optimized out>, time=time@entry=5000)
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057adb4 in OCC::AccountState::slotInvalidCredentials()
#8 0x000000000057ac76 in OCC::AccountState::slotConnectionValidatorResult(OCC::ConnectionValidator::Status, QStringList const&) ()
#9 0x00000000005ab45c in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)
#10 0x00007ffff45dcd30 in QMetaObject::activate
#11 0x00007ffff7b78671 in OCC::ConnectionValidator::connectionResult(OCC::ConnectionValidator::Status, QStringList) ()
#12 0x00007ffff7ae2514 in OCC::ConnectionValidator::reportResult(OCC::ConnectionValidator::Status) ()
#13 0x00007ffff7ae39b7 in OCC::ConnectionValidator::slotAuthFailed(QNetworkReply*) ()
#14 0x00007ffff7b784a9 in OCC::ConnectionValidator::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dcd30 in QMetaObject::activate
#16 0x00007ffff7b766dc in OCC::AbstractNetworkJob::networkError(QNetworkReply*)
#17 0x00007ffff7af9f6e in OCC::AbstractNetworkJob::slotFinished()
#18 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#20 0x00007ffff45dd607 in QMetaObject::activate
#21 0x00007ffff4edd143 in QNetworkReply::finished
#22 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#23 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#24 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#25 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#27 0x00007ffff45dd607 in QMetaObject::activate
#28 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
#29 0x00007ffff4e1ea07 in QNetworkAccessManagerPrivate::authenticationRequired
#30 0x00007ffff4e3c784 in QNetworkReplyHttpImplPrivate::httpAuthenticationRequired
Another case of Main Thread:
#5 0x00007ffff4e1edd3 in QNetworkAccessManagerPrivate::clearCache
#6 0x00007ffff7b6fb03 in OCC::HttpCredentials::invalidateToken()
#7 0x000000000057b1e4 in OCC::AccountState::slotInvalidCredentials() ()
#8 0x00000000005abb8a in OCC::AccountState::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#9 0x00007ffff45dcd30 in QMetaObject::activate
#10 0x00007ffff7b76ed5 in OCC::Account::invalidCredentials() ()
#11 0x00007ffff7ad55f5 in OCC::Account::handleInvalidCredentials()
#12 0x00007ffff7afa69a in OCC::AbstractNetworkJob::slotFinished()
#13 0x00007ffff7b7654d in OCC::AbstractNetworkJob::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#15 0x00007ffff45dd607 in QMetaObject::activate
#16 0x00007ffff4edd143 in QNetworkReply::finished
#17 0x00007ffff4e3fec7 in QNetworkReplyHttpImplPrivate::finished
#18 0x00007ffff4e41818 in QNetworkReplyHttpImpl::close
#19 0x00007ffff7b7047b in OCC::HttpCredentials::slotAuthentication(QNetworkReply*, QAuthenticator*) ()
#20 0x00007ffff7b79092 in OCC::HttpCredentials::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ()
#22 0x00007ffff45dd607 in QMetaObject::activate
#23 0x00007ffff4e1d6fb in QNetworkAccessManager::authenticationRequired
Now that we have a separate list for files that could not be synced,
we can make sure that it only shows entries for files that are still
not in sync with the server. This allows the user to treat this list
as action items in order to get everything synced, including the
blacklist.
Simply remove the keep-errors logic that was used when the lists were
merged to achieve this result.
This has been fixed in the meanwhile, but we are still shipping
with Qt 5.4. Also, some Linux Distros will still have older Qt
versions.
Addresses issue #4301
The error status of children should only be used for the etag logic.
The SocketApi uses a path matching system to do this and the UI should
report errors only for individual involved files/directories.
This use the previous code by resetting the progress to hide
the progress back and then return errors in the FolderErrorMsg
data role of the folder model.
This also remove the unused FolderRemotePath role, remove FolderStatus
in favor of invalidating all roles in dataChanged and make sure
that the SyncRunning role is transfered properly from the SyncResult
to show the warning icon during sync.
Since the presence of any path in SyncEngine::_syncedItems
would translate in a SYNC status, platforms that don't refresh
all their status cache after an UPDATE_VIEW message like OS X
or Windows would keep displaying that status even after all
files are successfully synchronized.
- Read SyncFileItem::_status to determine the status to display mid-sync
- Match moved paths also to _renameTarget since this might be the
path to match
- Make sure that PropagateDirectory jobs also set SyncFileItem::_status
properly
If all the files bring us to past timestamp, it is possibly a backup
restoration in the server. In which case we want don't want to just
overwrite newer files with the older ones.
Issue #2325
After c3cf6aef7d the invokeMethod calls
should be adjusted to pass the new method arguments.
The result was currently a passing sync with this error message on
the console:
QMetaObject::invokeMethod: No such method OCC::Folder::slotSyncFinished()
The socket api uses native folder separator. We need to use QDir::cleanPath
for anything else so we only work with '/' everywhere else in the code
This fixes the sharing dialog on window.
Issue #4311
Since owncloud 2.1, csync_vio_local_stat was optimized because readdir
would already fetch most of the info. This works for the discovery,
but not later. And we used this function later for symliks and co.
So this fixes the .lnk on windows
Issue #4300
This secret key was used to wipe the database. In the past this was
usefull because of many bugs, but now this is not usefull anymore.
And cause trouble because it also erase the selective sync list.
Issue #4182
It's just a feature that was not there in 2.0
It means that removed folder stay on the undecided list if it is removed
from the server until the user press apply in the selective sync widget.
Not a very bad bug anyway.
As discusses with jan.
* Detailed permissions displayed in qtoolboxmenu
* Made share rows slightly smaller
Bug fix:
* Do not show delete permissions for file shares
Before the selective sync status text and apply/cancel buttons
were shown as soon as any folder was expanded. This changes it
to only show when the model is dirty (or a big folder confirmation
is needed).
This is nice because we auto-open the folder list sometimes
and having the apply/cancel buttons visible makes users think a
decision is needed.
* Compute the content checksum (in addition to the optional
transmission checksum) during upload (.eml files only)
* Add hook to compute and compare the checksum in csync_update
* Add content checksum to database, remove transmission checksum
The signal jsonReceived() now not only delivers the raw json string, but
also the status code that came as OCS reply.
Also, fixed a typo in the signals name (recieved => received).
Fix the warning:
QLayout: Attempting to add QLayout "" to OCC::ActivitySettings "", which already has a layout
It was caused because one layout was created with the wrong parent
A 403 is a reply code sent from the file firewall to indicate that
this directory is forbidden to use for the user.
The patch handles it by setting the state to IGNORED.
This addresses #3490
This patch lets a successful etag job check mark a timestamp.
If next time a connection check is requested, it is checked if
the last ETag happened within the last 30 seconds and if so the
connection check can be checked.
This way we avoid half of the PROPFINDs if all goes well.
- Changed sequence of menu items
- lowercased entries
- removed the "Account" from entries, its in the toolbox button already
- added a little space between toolbox button label and the rectangle.
Note that the activity has also entries of files that are not synced so
that not every activity entry has to have a local pendant.
Also, one activity entry can reference multiple files, so only the first
one is shown.
The problem was that Share could be deleted *before*
the OcsShareJob itself finished. Since Share was the
parent of the network job, its object would be deleted
too early.
In general, it's unnecessary to assign parents to the OcsJobs
because they delete themselves when finished.
