Backport #26654 by @lunny
copy and modified from #14572
> Whilst debating enforcing MFA within our team, I realised there isn't
a lot of context to the side effects of enabling it. Most of us use Git
over HTTP and would need to add a token.
I plan to add another PR that adds a sentence to the UI about needing to
generate a token when enabling MFA if HTTP is to be used.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 2f4de240c1)
Backport #26267 by @wxiaoguang
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a758337046)
Backport #26068 by @felixvictor
The setting `MAILER_TYPE` is deprecated.
According to the config cheat sheet, it should be `PROTOCOL`.
Co-authored-by: Felix Victor <felix.victor.na@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit 72b55c8094)
Backport #26096 by @thigg
related #1635#18159
This will probably be obsolete at some point, but it should not break
anything and it may help some users
Co-authored-by: thigg <thigg@users.noreply.github.com>
(cherry picked from commit 5992365fc1)
Backport #25981 by @asdil12
After RPM is supported with https://github.com/go-gitea/gitea/pull/23380
let's show the user
how to add the repo and install the RPM via all common package managers.
Co-authored-by: Dominik Heidler <dominik@heidler.eu>
(cherry picked from commit dfd371a363)
Backport #26004 by @jolheiser
As title, `dev` tags are no longer used since we switched to `nightly`
Signed-off-by: jolheiser <john.olheiser@gmail.com>
(cherry picked from commit ac129d4b4c)
Backport #25417 by @wxiaoguang
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit ee47face12)
Backport #25648
Replace #25580Fix#19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
The only conflict during backport is "ui divider" in
templates/install.tmpl
Backport #25771 by @leavesster
---
according `docker/rootless/usr/local/bin/docker-setup.sh` , in rootless
docker setup, ssh port is 2222.
and mysql database case should port same as PostgreSQL port
Co-authored-by: leavesster <11785335+leavesster@users.noreply.github.com>
Backport #25581 by @wolfogre
Resolve#24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #25342 by @pmig
We created a Gitea application for the [Exoscale
Marketplace](https://www.exoscale.com/marketplace/listing/glasskube-gitea/)
for easier installation on the European cloud provider.
The installation is managed via the [Glasskube Kubernetes
Operator](https://github.com/glasskube/operator).
Signed-off-by: Philip Miglinci <pmig@glasskube.eu>
Co-authored-by: Philip Miglinci <p.miglinci@gmail.com>
Backport #25256 by @thezzisu
In this pull request, the following changes are addressed:
- State user should create `config.yaml` before start container to avoid
errors.
- Provided instructions to deploy runners using docker compose.
Co-authored-by: Zisu Zhang <thezzisu@gmail.com>
Backport #23911 by @lunny
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25202 by @wxiaoguang
Close#23654Close#24684
@techknowlogick I still think we need to rename
https://dl.gitea.com/gitea/1.20/ to
https://dl.gitea.com/gitea/1.20-nightly/
`/gitea/1.20/` is quite confusing, it needs these words to explain why.
If we call it `1.20-nightly`, the FAQ can be simplified a lot.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Enable all source maps in dev build
- Disable all source maps in prod build
- Provide `ENABLE_SOURCEMAP` env var to override it.
I think the strange error seen in
https://github.com/go-gitea/gitea/issues/24784 is sourcemap related, so
if we enable/disable them all, it might go away. But it's most
definitely a Safari bug.
With all sourcemaps disabled, binary size goes down by around 1-2 MB,
with all enabled it goes up by around 12MB. If +12MB is acceptable, we
could also always enable them by default as fully source maps do have
some debugging benefits.
If a user starts a runner using a Docker image without making additional
configurations, the [cache action](https://github.com/actions/cache)
will not work properly.
Therefore, add a section in the documentation that explains how to
configure the cache correctly.
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
The PKCE flow according to [RFC
7636](https://datatracker.ietf.org/doc/html/rfc7636) allows for secure
authorization without the requirement to provide a client secret for the
OAuth app.
It is implemented in Gitea since #5378 (v1.8.0), however without being
able to omit client secret.
Since #21316 Gitea supports setting client type at OAuth app
registration.
As public clients are already forced to use PKCE since #21316, in this
PR the client secret check is being skipped if a public client is
detected. As Gitea seems to implement PKCE authorization correctly
according to the spec, this would allow for PKCE flow without providing
a client secret.
Also add some docs for it, please check language as I'm not a native
English speaker.
Closes#17107Closes#25047
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
This addressees some things from #24406 that came up after the PR was
merged. Mostly from @delvh.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Changes:
1. Use uniform links types relative to doc folder (start with `doc/`)
2. According to [docusaurus
links](https://docusaurus.io/docs/markdown-features/links), if `<a>` is
used, the `href` is resolved as URL location, but not file location. So
need to use `[text]({{< relref "path" >}})` instead.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
