The idea is to use a Layered Asset File-system (modules/assetfs/layered.go)
For example: when there are 2 layers: "custom", "builtin", when access
to asset "my/page.tmpl", the Layered Asset File-system will first try to
use "custom" assets, if not found, then use "builtin" assets.
This approach will hugely simplify a lot of code, make them testable.
Other changes:
* Simplify the AssetsHandlerFunc code
* Simplify the `gitea embedded` sub-command code
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.
This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.
Fixes#23363
EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:
## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.
There was something else but I can't remember at the moment.
EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Close#24002
Two problems before:
1. The `log.Fatal` is missing after these `wrapFatal` calls, so the
error is not shown to users.
2. `GetTemplateAssetNames` has different behaviors for local files and
builtin assets, for builtin assets, it also returns directories, so we
need to check the extension again.
I have tested with `TAGS="bindata sqlite sqlite_unlock_notify" make
build && ./gitea` , it works well now. Before, the server responds
internal server error (because it doesn't complete the template parsing)
None of the features of `unrolled/render` package is used.
The Golang builtin "html/template" just works well. Then we can improve
our HTML render to resolve the "$.root.locale.Tr" problem as much as
possible.
Next step: we can have a template render pool (by Clone), then we can
inject global functions with dynamic context to every `Execute` calls.
Then we can use `{{Locale.Tr ....}}` directly in all templates , no need
to pass the `$.root.locale` again and again.
One of the steps in #23328
Before there were 3 different but similar functions: dict/Dict/mergeinto
The code was just copied & pasted, no test.
This PR defines a new stable `dict` function, it covers all the 3 old
functions behaviors, only +160 -171
Future developers do not need to think about or guess the different dict
functions, just use one: `dict`
Why use `dict` but not `Dict`? Because there are far more `dict` than
`Dict` in code already ......
One of the proposals in #23328
This PR introduces a simple expression calculator
(templates/eval/eval.go), it can do basic expression calculations.
Many untested template helper functions like `Mul` `Add` can be replaced
by this new approach.
Then these `Add` / `Mul` / `percentage` / `Subtract` / `DiffStatsWidth`
could all use this `Eval`.
And it provides enhancements for Golang templates, and improves
readability.
Some examples:
----
* Before: `{{Add (Mul $glyph.Row 12) 12}}`
* After: `{{Eval $glyph.Row "*" 12 "+" 12}}`
----
* Before: `{{if lt (Add $i 1) (len $.Topics)}}`
* After: `{{if Eval $i "+" 1 "<" (len $.Topics)}}`
## FAQ
### Why not use an existing expression package?
We need a highly customized expression engine:
* do the calculation on the fly, without pre-compiling
* deal with int/int64/float64 types, to make the result could be used in
Golang template.
* make the syntax could be used in the Golang template directly
* do not introduce too much complex or strange syntax, we just need a
simple calculator.
* it needs to strictly follow Golang template's behavior, for example,
Golang template treats all non-zero values as truth, but many 3rd
packages don't do so.
### What's the benefit?
* Developers don't need to add more `Add`/`Mul`/`Sub`-like functions,
they were getting more and more.
Now, only one `Eval` is enough for all cases.
* The new code reads better than old `{{Add (Mul $glyph.Row 12) 12}}`,
the old one isn't familiar to most procedural programming developers
(eg, the Golang expression syntax).
* The `Eval` is fully covered by tests, many old `Add`/`Mul`-like
functions were never tested.
### The performance?
It doesn't use `reflect`, it doesn't need to parse or compile when used
in Golang template, the performance is as fast as native Go template.
### Is it too complex? Could it be unstable?
The expression calculator program is a common homework for computer
science students, and it's widely used as a teaching and practicing
purpose for developers. The algorithm is pretty well-known.
The behavior can be clearly defined, it is stable.
The first step of #23328
This PR cleans:
1. Dead function like `SubStr`
2. Unnecessary function like `UseHTTPS`, it should be provided by
`window.origin`
3. Duplicate function like `IsShowFullName`, there was already a
`DeafultShowFullName`
I have searched these removed functions globally, no use in code.
Remove the misbehaving function and call
Repository.GetFilesChangedBetween instead.
Fixes#23919
---
~~_TODO_ test this~~ `Repository.getFilesChanged` seems to be only used
by Gitea Actions, but a similar function already exists
**Update** I tested this change and the issue is gone.
The _graceful_ should fail less when the `.editorconfig` file isn't
properly written, e.g. boolean values from YAML or unparseable numbers
(when a number is expected). As is... information is lost as the
_warning_ (a go-multierror.Error) is ignored. If anybody knows how to
send them to the UI as warning; any help is appreciated.
Closes#20694
Signed-off-by: Yoan Blanc <yoan@dosimple.ch>
At first, we have one unified team unit permission which is called
`Team.Authorize` in DB.
But since https://github.com/go-gitea/gitea/pull/17811, we allowed
different units to have different permission.
The old code is only designed for the old version. So after #17811, if
org users have write permission of other units, but have no permission
of packages, they can also get write permission of packages.
Co-authored-by: delvh <dev.lh@web.de>
Follow #23633 and #23240Close#23814
Now we almost have a complete test set for Gitea's LocalStore.
This PR is still a quick fix for the legacy locale system (see the
TODOs), to resolve the problems fundamentally, it needs more work in the
future.
Follow #21962
After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.
This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.
And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.
I think this PR needs to be backported.
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
Closes#20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393Closes#22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Reference:
https://github.com/go-gitea/gitea/issues/22578#issuecomment-1444180053
Credits to @tdesveaux , thank you very much for catching the problem. If
you'd like to open a PR, feel free to replace this one.
Git reports fatal errors for ambiguous arguments:
```
fatal: ambiguous argument 'refs/a...refs/b': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
```
So the `--` separator is necessary in some cases.
Follow:
* #23574
* Remove all ".tooltip[data-content=...]"
Major changes:
* Remove "tooltip" class, use "[data-tooltip-content=...]" instead of
".tooltip[data-content=...]"
* Remove legacy `data-position`, it's dead code since last Fomantic
Tooltip -> Tippy Tooltip refactoring
* Rename reaction attribute from `data-content` to
`data-reaction-content`
* Add comments for some `data-content`: `{{/* used by the form */}}`
* Remove empty "ui" class
* Use "text color" for SVG icons (a few)
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.
Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.
Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.
## ⚠️ BREAKING ⚠️
The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Close#23622
As described in the issue, disabling the LFS/Package settings will cause
errors when running `gitea dump` or `gitea doctor`. We need to check the
settings and the related operations should be skipped if the settings
are disabled.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Follow #23037
Fix [#22598
comment](https://github.com/go-gitea/gitea/issues/22958#issuecomment-1475763042)
Workflows with `pull_request` trigger event can't be triggered by
`pull_request_sync` event. This PR adds the `canGithubEventMatch`
function to check if a Github event can match any Gitea event. If the
Github event matches a Gitea event, the related workflows should be
triggered.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Since #23493 has conflicts with latest commits, this PR is my proposal
for fixing #23371
Details are in the comments
And refactor the `modules/options` module, to make it always use
"filepath" to access local files.
Benefits:
* No need to do `util.CleanPath(strings.ReplaceAll(p, "\\", "/"))),
"/")` any more (not only one before)
* The function behaviors are clearly defined
There are multiple duplicate reports of errors during template rendering
due to broken custom templates.
Unfortunately the error returned here is somewhat difficult for users to
understand and it doesn't return the context of the error.
This PR attempts to parse the error returned by the template renderer to
add in some further context including the filename of the template AND
the preceding lines within that template file.
Ref #23274
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Close#23444
Add `Repository` to npm package `Metadata` struct so the `repository` in
`package.json` can be stored and be returned in the endpoint.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
This PR fixes the tags sort issue mentioned in #23432
The tags on dropdown shoud be sorted in descending order of time but are
not. Because when getting tags, it execeutes `git tag sort
--sort=-taggerdate`. Git supports two types of tags: lightweight and
annotated, and `git tag sort --sort=-taggerdate` dosen't work with
lightweight tags, which will not give correct result. This PR add
`GetTagNamesByRepoID ` to get tags from the database so the tags are
sorted.
Also adapt this change to the droplist when comparing branches.
Dropdown places:
<img width="369" alt="截屏2023-03-15 14 25 39"
src="https://user-images.githubusercontent.com/17645053/225224506-65a72e50-4c11-41d7-8187-a7e9c7dab2cb.png">
<img width="675" alt="截屏2023-03-15 14 25 27"
src="https://user-images.githubusercontent.com/17645053/225224526-65ce8008-340c-43f6-aa65-b6bd9e1a1bf1.png">
Currently gitea shows no commit information for files starting with a
colon.
[I set up a minimal repro repository that reproduces this error once
it's migrated on gitea](https://github.com/kbolashev/colon-test)
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219326625-0e6d3a86-8b58-4d67-bc24-8a78963f36b9.png">
This is happening because the filenames piped to the `git log` command
are written as is, and it doesn't work when you have a colon at the
start of the filename, and you need to escape it.
You can test it locally, if you do
```
mkdir repo
git init
touch :file
git add . && git commit -m "Add file with colon"
git log -- :file
```
git log returns nothing. However, if you do `git log -- "\:file"`, it
will show the commit with the file change.
This PR escapes the starting colons in paths in the `LogNameStatusRepo`
function, making gitea return commit info about the file with the bad
filename.
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219328299-46451246-4006-45e3-89b1-c244635ded23.png">
This error shows up only with files starting with colon, anywhere else
in filename is ok. Dashes at the beginning also seem to be working.
I don't know gitea internals well enough to know where else this error
can pop up, so I'm keeping this PR small as suggested by your
contributor guide
Creating pid file should not belong to setting package and only web
command needs that. So this PR moves pidfile creation from setting
package to web command package to keep setting package more readable.
I marked this as `break` because the PIDFile path moved. For those who
have used the pid build argument, it has to be changed.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
hardcode the version of test_env we use in docker, so that we can use
different major versions of golang between versions of Gitea
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
this is a simple endpoint that adds the ability to rename users to the
admin API.
Note: this is not in a mergeable state. It would be better if this was
handled by a PATCH/POST to the /api/v1/admin/users/{username} endpoint
and the username is modified.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close#23411
Always pass "page" query parameter to backend, and make backend respect
it.
The `ctx.FormInt("limit")` is never used, so removed.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Support to iterator subdirectory in ObjectStorage for
ObjectStorage.Iterator method.
It's required for https://github.com/go-gitea/gitea/pull/22738 to make
artifact files cleanable.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.
Implements #14865
---------
Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix scoped label left and right part breaking across lines.
* Remove slanted divider in scoped label display, make it straight.
After using this for a while, this feels more visually noisy than
helpful.
* Reduce contrast between scope and item to reduce probability of
unreadable text on background.
* Change documentation to remove mention of non-exclusive scoped labels.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/22676
Context Data `IsOrganizationMember` and `IsOrganizationOwner` is used to
control the visibility of `people` and `team` tab.
2871ea0809/templates/org/menu.tmpl (L19-L40)
And because of the reuse of user projects page, User Context is changed
to Organization Context. But the value of `IsOrganizationMember` and
`IsOrganizationOwner` are not being given.
I reused func `HandleOrgAssignment` to add them to the ctx, but may have
some unnecessary variables, idk whether it is ok.
I found there is a missing `PageIsViewProjects` at create project page.
When the base repository contains multiple branches with the same
commits as the base branch, pull requests can show a long list of
commits already in the base branch as having been added.
What this is supposed to do is exclude commits already in the base
branch. But the mechansim to do so assumed a commit only exists in a
single branch. Now use `git rev-list A B --not branchName` instead of
filtering commits afterwards.
The logic to detect if there was a force push also was wrong for
multiple branches. If the old commit existed in any branch in the base
repository it would assume there was no force push. Instead check if the
old commit is an ancestor of the new commit.
Follow #22568
* Remove unnecessary ToTrustedCmdArgs calls
* the FAQ in #22678
* Quote: When using ToTrustedCmdArgs, the code will be very complex (see
the changes for examples). Then developers and reviewers can know that
something might be unreasonable.
* The `signArg` couldn't be empty, it's either `-S{keyID}` or
`--no-gpg-sign`.
* Use `signKeyID` instead, add comment "empty for no-sign, non-empty to
sign"
* 5-line code could be extracted to a common `NewGitCommandCommit()` to
handle the `signKeyID`, but I think it's not a must, current code is
clear enough.
Related to: #22294#23186#23054
Replace: #23218
Some discussion is in the comments of #23218.
Highlights:
- Add Expiration for cache context. If a cache context has been used for
more than 10s, the cache data will be ignored, and warning logs will be
printed.
- Add `discard` field to `cacheContext`, a `cacheContext` with `discard`
true will drop all cached data and won't store any new one.
- Introduce `WithNoCacheContext`, if one wants to run long-life tasks,
but the parent context is a cache context,
`WithNoCacheContext(perentCtx)` will discard the cache data, so it will
be safe to keep the context for a long time.
- It will be fine to treat an original context as a cache context, like
`GetContextData(context.Backgraud())`, no warning logs will be printed.
Some cases about nesting:
When:
- *A*, *B* or *C* means a cache context.
- ~*A*~, ~*B*~ or ~*C*~ means a discard cache context.
- `ctx` means `context.Backgrand()`
- *A(ctx)* means a cache context with `ctx` as the parent context.
- *B(A(ctx))* means a cache context with `A(ctx)` as the parent context.
- `With` means `WithCacheContext`
- `WithNo` means `WithNoCacheContext`
So:
- `With(ctx)` -> *A(ctx)*
- `With(With(ctx))` -> *A(ctx)*, not *B(A(ctx))*
- `With(With(With(ctx)))` -> *A(ctx)*, not *C(B(A(ctx)))*
- `WithNo(ctx)` -> *ctx*, not *~A~(ctx)*
- `WithNo(With(ctx))` -> *~A~(ctx)*
- `WithNo(WithNo(With(ctx)))` -> *~A~(ctx)*, not *~B~(~A~(ctx))*
- `With(WithNo(With(ctx)))` -> *B(~A~(ctx))*
- `WithNo(With(WithNo(With(ctx))))` -> *~B~(~A~(ctx))*
- `With(WithNo(With(WithNo(With(ctx)))))` -> *C(~B~(~A~(ctx)))*
Avoid maintaining two copies of code, some functions can be used with
both `bindata` and `no bindata`.
And removed `GetRepoInitFile`, it's useless now.
`Readme`/`Gitignore`/`License`/`Labels` will clean the name and use
custom files when available.
At the Moment it is possible to read files in another Directory as
supposed using the Options functions. e.g.
`options.Gitignore("../label/Default) `. This was discovered while
working on #22783, which exposes `options.Gitignore()` through the
public API. At the moment, this is not a security problem, as this
function is only used internal, but I thought it would be a good idea to
make a PR to fix this for all types of Options files, not only
Gitignore, to make it safe for the further. This PR should be merged
before the linked PR.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close#17108
This PR uses a trick (removing the ID3 tag) to detect the content again
to to see whether the content is text type.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The merge and update branch code was previously a little tangled and had
some very long functions. The functions were not very clear in their
reasoning and there were deficiencies in their logging and at least one
bug in the handling of LFS for update by rebase.
This PR substantially refactors this code and splits things out to into
separate functions. It also attempts to tidy up the calls by wrapping
things in "context"s. There are also attempts to improve logging when
there are errors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: delvh <dev.lh@web.de>
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
This branch continues the work of #23092 and attempts to rid the
codebase of any `nil` contexts when using a `RenderContext`.
Anything that renders markdown or does post processing may call
`markup.sha1CurrentPatternProcessor()`, and this runs
`git.OpenRepository()`, which needs a context. It will panic if the
context is `nil`. This branch attempts to _always_ include a context
when creating a `RenderContext` to prevent future crashes.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
## TLDR
* Fix the broken page / broken image problem when click "Install"
* Close#20089
* Fix the Password Hash Algorithm display problem for #22942
* Close#23183
* Close#23184
## Details
### The broken page / broken image problem when click "Install"
(Redirect failed after install gitea #23184)
Before: when click "install", all new requests will fail, because the
server has been restarted. Users just see a broken page with broken
images, sometimes the server is not ready but the user would have been
redirect to "/user/login" page, then the users see a new broken page
(connection refused or something wrong ...)
After: only check InstallLock=true for necessary handlers, and sleep for
a while before restarting the server, then the browser has enough time
to load the "post-install" page. And there is a script to check whether
"/user/login" is ready, the user will only be redirected to the login
page when the server is ready.
### During new instance setup make 'Gitea Base URL' filled from
window.location.origin #20089
If the "app_url" input contains `localhost` (the default value from
config), use current window's location href as the `app_url` (aka
ROOT_URL)
### Fix the Password Hash Algorithm display problem for "Provide the
ability to set password hash algorithm parameters #22942"
Before: the UI shows `pbkdf2$50000$50`
<details>
</details>
After: the UI shows `pbkdf2`
<details>
</details>
### GET data: net::ERR_INVALID_URL #23183
Cause by empty `data:` in `<link rel="manifest"
href="data:{{.ManifestData}}">`
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The code for GetFilesChangedBetween uses `git diff --name-only
base..head` to get the names of files changed between base and head
however this forgets that git will escape certain values.
This PR simply switches to use `-z` which has the `NUL` character as the
separator.
Ref https://github.com/go-gitea/gitea/pull/22568#discussion_r1123138096
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Extract from #11669 and enhancement to #22585 to support exclusive
scoped labels in label templates
* Move label template functionality to label module
* Fix handling of color codes
* Add Advanced label template
As you can imagine, for the Blender development process it is rather
nice to be able to include videos in issues, pull requests, etc.
This PR allows the `<video>` HTML tag to be used in MarkDown, with the
`src`, `autoplay`, and `controls` attributes.
## Help Needed
To have this fully functional, personally I feel the following things
are still missing, and would appreciate some help from the Gitea team.
### Styling
Some CSS is needed, but I couldn't figure out which of the LESS files
would work. I tried `web_src/less/markup/content.less` and
`web_src/less/_base.less`, but after running `make` the changes weren't
seen in the frontend.
This I would consider a minimal set of CSS rules to be applied:
```css
video {
max-width: 100%;
max-height: 100vh;
}
```
### Default Attributes
It would be fantastic if Gitea could add some default attributes to the
`<video>` tag. Basically `controls` should always be there, as there is
no point in disallowing scrolling through videos, looping them, etc.
### Integration with the attachments system
Another thing that could be added, but probably should be done in a
separate PR, is the integration with the attachments system. Dragging in
a video should attach it, then generate the appropriate MarkDown/HTML.
There have been a number of reports of PRs being blocked whilst being
checked which have been difficult to debug. In investigating #23050 I
have realised that whilst the Warn there is somewhat of a miscall there
was a real bug in the way that the LevelUniqueQueue was being restored
on start-up of the PersistableChannelUniqueQueue.
Next there is a conflict in the setting of the internal leveldb queue
name - This wasn't being set so it was being overridden by other unique
queues.
This PR fixes these bugs and adds a testcase.
Thanks to @brechtvl for noticing the second issue.
Fix#23050
and others
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This arose out of #22451; it seems we are checking using non-global
settings to see if a config value is set, in order to decide whether to
call another global(-indeed) configuration command. This PR changes it
so that both the check and the set are for global configuration.
Partially fix#23050
After #22294 merged, it always has a warning log like `cannot get
context cache` when starting up. This should not affect any real life
but it's annoying. This PR will fix the problem. That means when
starting up, getting the system settings will not try from the cache but
will read from the database directly.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
minio/sha256-simd provides additional acceleration for SHA256 using
AVX512, SHA Extensions for x86 and ARM64 for ARM.
It provides a drop-in replacement for crypto/sha256 and if the
extensions are not available it falls back to standard crypto/sha256.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Close #23027
`git commit` message option _only_ supports 4 formats (well, only ....):
* `"commit", "-m", msg`
* `"commit", "-m{msg}"` (no space)
* `"commit", "--message", msg`
* `"commit", "--message={msg}"`
The long format with `=` is the best choice, and it's documented in `man
git-commit`:
`-m <msg>, --message=<msg> ...`
ps: I would suggest always use long format option for git command, as
much as possible.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The API to create tokens is missing the ability to set the required
scopes for tokens, and to show them on the API and on the UI.
This PR adds this functionality.
Signed-off-by: Andrew Thornton <art27@cantab.net>
During the recent hash algorithm change it became clear that the choice
of password hash algorithm plays a role in the time taken for CI to run.
Therefore as attempt to improve CI we should consider using a dummy
hashing algorithm instead of a real hashing algorithm.
This PR creates a dummy algorithm which is then set as the default
hashing algorithm during tests that use the fixtures. This hopefully
will cause a reduction in the time it takes for CI to run.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
This PR refactors and improves the password hashing code within gitea
and makes it possible for server administrators to set the password
hashing parameters
In addition it takes the opportunity to adjust the settings for `pbkdf2`
in order to make the hashing a little stronger.
The majority of this work was inspired by PR #14751 and I would like to
thank @boppy for their work on this.
Thanks to @gusted for the suggestion to adjust the `pbkdf2` hashing
parameters.
Close#14751
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Allow back-dating user creation via the `adminCreateUser` API operation.
`CreateUserOption` now has an optional field `created_at`, which can
contain a datetime-formatted string. If this field is present, the
user's `created_unix` database field will be updated to its value.
This is important for Blender's migration of users from Phabricator to
Gitea. There are many users, and the creation timestamp of their account
can give us some indication as to how long someone's been part of the
community.
The back-dating is done in a separate query that just updates the user's
`created_unix` field. This was the easiest and cleanest way I could
find, as in the initial `INSERT` query the field always is set to "now".
To avoid duplicated load of the same data in an HTTP request, we can set
a context cache to do that. i.e. Some pages may load a user from a
database with the same id in different areas on the same page. But the
code is hidden in two different deep logic. How should we share the
user? As a result of this PR, now if both entry functions accept
`context.Context` as the first parameter and we just need to refactor
`GetUserByID` to reuse the user from the context cache. Then it will not
be loaded twice on an HTTP request.
But of course, sometimes we would like to reload an object from the
database, that's why `RemoveContextData` is also exposed.
The core context cache is here. It defines a new context
```go
type cacheContext struct {
ctx context.Context
data map[any]map[any]any
lock sync.RWMutex
}
var cacheContextKey = struct{}{}
func WithCacheContext(ctx context.Context) context.Context {
return context.WithValue(ctx, cacheContextKey, &cacheContext{
ctx: ctx,
data: make(map[any]map[any]any),
})
}
```
Then you can use the below 4 methods to read/write/del the data within
the same context.
```go
func GetContextData(ctx context.Context, tp, key any) any
func SetContextData(ctx context.Context, tp, key, value any)
func RemoveContextData(ctx context.Context, tp, key any)
func GetWithContextCache[T any](ctx context.Context, cacheGroupKey string, cacheTargetID any, f func() (T, error)) (T, error)
```
Then let's take a look at how `system.GetString` implement it.
```go
func GetSetting(ctx context.Context, key string) (string, error) {
return cache.GetWithContextCache(ctx, contextCacheKey, key, func() (string, error) {
return cache.GetString(genSettingCacheKey(key), func() (string, error) {
res, err := GetSettingNoCache(ctx, key)
if err != nil {
return "", err
}
return res.SettingValue, nil
})
})
}
```
First, it will check if context data include the setting object with the
key. If not, it will query from the global cache which may be memory or
a Redis cache. If not, it will get the object from the database. In the
end, if the object gets from the global cache or database, it will be
set into the context cache.
An object stored in the context cache will only be destroyed after the
context disappeared.
!fixup https://github.com/go-gitea/gitea/pull/22177
The only place this function is used so far is in
findReadmeFileInEntries(), so the only visible effect of this oversight
was in an obscure README-related corner: if the README was in a
subfolder and was a symlink that pointed up, as in .github/README.md ->
../docs/old/setup.md, the README would fail to render when FollowLinks()
hit the nil ptree. This makes the ptree non-nil and thus repairs it.
These functions don't examine contents, just filenames, so they don't
fit in well in a markup module.
This was originally part of
https://github.com/go-gitea/gitea/pull/22177.
Signed-off-by: Nick Guenther <nick.guenther@polymtl.ca>
Add setting to allow edits by maintainers by default, to avoid having to
often ask contributors to enable this.
This also reorganizes the pull request settings UI to improve clarity.
It was unclear which checkbox options were there to control available
merge styles and which merge styles they correspond to.
Now there is a "Merge Styles" label followed by the merge style options
with the same name as in other menus. The remaining checkboxes were
moved to the bottom, ordered rougly by typical order of operations.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes#22714
### Changes:
1. Add a token filter which named "camelCase" between custom unicode
token filter and "to_lower" token filter when add custom analyzer.
### Notice:
If users want this feature to work, they should delete folder under
{giteaPath}/data/indexers and restart application. Then application will
create a new IndexMapping.
### Screenshots:
### Others:
I originally attempted to give users the ability to configure the
"token_filters" in the "app.ini" file. But I found that if users does
not strictly follow a right order to register "token_filters", they
won't get the expected results. I think it is difficult to ask users to
do this. So I finally give up this idea.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This code was copy-pasted at some point. Revisit it to reunify it.
~~Doing that then encouraged simplifying the types of a couple of
related functions.~~
~~As a follow-up, move two helper functions, `isReadmeFile()` and
`isReadmeFileExtension()`, intimately tied to `findReadmeFile()`, in as
package-private.~~
Signed-off-by: Nick Guenther <nick.guenther@polymtl.ca>
In Go code, HTMLURL should be only used for external systems, like
API/webhook/mail/notification, etc.
If a URL is used by `Redirect` or rendered in a template, it should be a
relative URL (aka `Link()` in Gitea)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
I haven't tested `runs_list.tmpl` but I think it could be right.
After this PR, besides the `<meta .. HTMLURL>` in html head, the only
explicit HTMLURL usage is in `pull_merge_instruction.tmpl`, which
doesn't affect users too much and it's difficult to fix at the moment.
There are still many usages of `AppUrl` in the templates (eg: the
package help manual), they are similar problems as the HTMLURL in
pull_merge_instruction, and they might be fixed together in the future.
Diff without space:
https://github.com/go-gitea/gitea/pull/22831/files?diff=unified&w=1
The use of `sort.Search` is wrong: The slice should be sorted, and
`return >= 0` doen't mean it exists, see the
[manual](https://pkg.go.dev/sort#Search).
Could be fixed like this if we really need it:
```diff
diff --git a/modules/charset/escape_stream.go b/modules/charset/escape_stream.go
index 823b63513..fcf1ffbc1 100644
--- a/modules/charset/escape_stream.go
+++ b/modules/charset/escape_stream.go
@@ -20,6 +20,9 @@ import (
var defaultWordRegexp = regexp.MustCompile(`(-?\d*\.\d\w*)|([^\` + "`" + `\~\!\@\#\$\%\^\&\*\(\)\-\=\+\[\{\]\}\\\|\;\:\'\"\,\.\<\>\/\?\s\x00-\x1f]+)`)
func NewEscapeStreamer(locale translation.Locale, next HTMLStreamer, allowed ...rune) HTMLStreamer {
+ sort.Slice(allowed, func(i, j int) bool {
+ return allowed[i] < allowed[j]
+ })
return &escapeStreamer{
escaped: &EscapeStatus{},
PassthroughHTMLStreamer: *NewPassthroughStreamer(next),
@@ -284,14 +287,8 @@ func (e *escapeStreamer) runeTypes(runes ...rune) (types []runeType, confusables
}
func (e *escapeStreamer) isAllowed(r rune) bool {
- if len(e.allowed) == 0 {
- return false
- }
- if len(e.allowed) == 1 {
- return e.allowed[0] == r
- }
-
- return sort.Search(len(e.allowed), func(i int) bool {
+ i := sort.Search(len(e.allowed), func(i int) bool {
return e.allowed[i] >= r
- }) >= 0
+ })
+ return i < len(e.allowed) && e.allowed[i] == r
}
```
But I don't think so, a map is better to do it.
It seems `VisibleType` is only designed for org at first. But it is also
used by user's visibility now.
So I think `org_type.go` can be changed to `visible_type.go`.
Creating a new buffered reader for every part of the blame can miss
lines, as it will read and buffer bytes that the next buffered reader
will not get.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Related to: https://github.com/go-gitea/gitea/issues/18061
This PR adds build info to the Prometheus metrics. This includes:
- goarch: https://pkg.go.dev/runtime#GOARCH
- goos: https://pkg.go.dev/runtime#pkg-constants
- goversion: https://pkg.go.dev/runtime#Version
- gitea version: just exposes the existing
code.gitea.io/gitea/modules/setting.AppVer
It's a similar approach to what some other Golang projects are doing,
e.g. Prometheus:
https://github.com/prometheus/common/blob/main/version/info.go
example /metrics response from Prometheus:
```
# HELP prometheus_build_info A metric with a constant '1' value labeled by version, revision, branch, goversion from which prometheus was built, and the goos and goarch for the build.
# TYPE prometheus_build_info gauge
prometheus_build_info{branch="HEAD",goarch="amd64",goos="linux",goversion="go1.19.4",revision="c0d8a56c69014279464c0e15d8bfb0e153af0dab",version="2.41.0"} 1
```
/metrics response from gitea with this PR:
```
# HELP gitea_build_info Build information
# TYPE gitea_build_info gauge
gitea_build_info{goarch="amd64",goos="linux",goversion="go1.20",version="2c6cc0b8c"} 1
```
Signed-off-by: Michal Wasilewski <mwasilewski@gmx.com>
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Signed-off-by: Michal Wasilewski <mwasilewski@gmx.com>
Fixes#19555
Test-Instructions:
https://github.com/go-gitea/gitea/pull/21441#issuecomment-1419438000
This PR implements the mapping of user groups provided by OIDC providers
to orgs teams in Gitea. The main part is a refactoring of the existing
LDAP code to make it usable from different providers.
Refactorings:
- Moved the router auth code from module to service because of import
cycles
- Changed some model methods to take a `Context` parameter
- Moved the mapping code from LDAP to a common location
I've tested it with Keycloak but other providers should work too. The
JSON mapping format is the same as for LDAP.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
partially fix#19345
This PR add some `Link` methods for different objects. The `Link`
methods are not different from `HTMLURL`, they are lack of the absolute
URL. And most of UI `HTMLURL` have been replaced to `Link` so that users
can visit them from a different domain or IP.
This PR also introduces a new javascript configuration
`window.config.reqAppUrl` which is different from `appUrl` which is
still an absolute url but the domain has been replaced to the current
requested domain.
During the refactoring of the git module, I found there were some
strange operations. This PR tries to fix 2 of them
1. The empty argument `--` in repo_attribute.go, which was introduced by
#16773. It seems unnecessary because nothing else would be added later.
2. The complex git service logic in repo/http.go.
* Before: the `hasAccess` only allow `service == "upload-pack" ||
service == "receive-pack"`
* After: unrelated code is removed. No need to call ToTrustedCmdArgs
anymore.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile
Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Every user can already disable the filter manually, so the explicit
setting is absolutely useless and only complicates the logic.
Previously, there was also unexpected behavior when multiple query
parameters were present.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.
A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.
Also add missing `repo.packages` unit to documentation.
code by: @brechtvl
## ⚠️ BREAKING ⚠️
When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
This PR follows #21535 (and replace #22592)
## Review without space diff
https://github.com/go-gitea/gitea/pull/22678/files?diff=split&w=1
## Purpose of this PR
1. Make git module command completely safe (risky user inputs won't be
passed as argument option anymore)
2. Avoid low-level mistakes like
https://github.com/go-gitea/gitea/pull/22098#discussion_r1045234918
3. Remove deprecated and dirty `CmdArgCheck` function, hide the `CmdArg`
type
4. Simplify code when using git command
## The main idea of this PR
* Move the `git.CmdArg` to the `internal` package, then no other package
except `git` could use it. Then developers could never do
`AddArguments(git.CmdArg(userInput))` any more.
* Introduce `git.ToTrustedCmdArgs`, it's for user-provided and already
trusted arguments. It's only used in a few cases, for example: use git
arguments from config file, help unit test with some arguments.
* Introduce `AddOptionValues` and `AddOptionFormat`, they make code more
clear and simple:
* Before: `AddArguments("-m").AddDynamicArguments(message)`
* After: `AddOptionValues("-m", message)`
* -
* Before: `AddArguments(git.CmdArg(fmt.Sprintf("--author='%s <%s>'",
sig.Name, sig.Email)))`
* After: `AddOptionFormat("--author='%s <%s>'", sig.Name, sig.Email)`
## FAQ
### Why these changes were not done in #21535 ?
#21535 is mainly a search&replace, it did its best to not change too
much logic.
Making the framework better needs a lot of changes, so this separate PR
is needed as the second step.
### The naming of `AddOptionXxx`
According to git's manual, the `--xxx` part is called `option`.
### How can it guarantee that `internal.CmdArg` won't be not misused?
Go's specification guarantees that. Trying to access other package's
internal package causes compilation error.
And, `golangci-lint` also denies the git/internal package. Only the
`git/command.go` can use it carefully.
### There is still a `ToTrustedCmdArgs`, will it still allow developers
to make mistakes and pass untrusted arguments?
Generally speaking, no. Because when using `ToTrustedCmdArgs`, the code
will be very complex (see the changes for examples). Then developers and
reviewers can know that something might be unreasonable.
### Why there was a `CmdArgCheck` and why it's removed?
At the moment of #21535, to reduce unnecessary changes, `CmdArgCheck`
was introduced as a hacky patch. Now, almost all code could be written
as `cmd := NewCommand(); cmd.AddXxx(...)`, then there is no need for
`CmdArgCheck` anymore.
### Why many codes for `signArg == ""` is deleted?
Because in the old code, `signArg` could never be empty string, it's
either `-S[key-id]` or `--no-gpg-sign`. So the `signArg == ""` is just
dead code.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Our trace logging is far from perfect and is difficult to follow.
This PR:
* Add trace logging for process manager add and remove.
* Fixes an errant read file for git refs in getMergeCommit
* Brings in the pullrequest `String` and `ColorFormat` methods
introduced in #22568
* Adds a lot more logging in to testPR etc.
Ref #22578
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
caused by #22680
`pushPayload.Ref` and `prPayload.PullRequest.Base.Ref` have the format
like `refs/heads/<branch_name>`, so we need to trim the prefix before
comparing.
The `no-store` cache control added in #20432 is causing form input to be
cleared unnecessarily on page reload. Instead use
`max-age=0,private,must-revalidate` which avoids this.
This was particularly a problem when typing a long comment for an issue
and then for example changing the label. The page would be reloaded and
lose the unsubmitted comment.
Fixes#22603
This PR fixes two bugs with Webauthn support:
* There was a longstanding bug within webauthn due to the backend using
URLEncodedBase64 but the javascript using decoding using plain base64.
This causes intermittent issues with users reporting decoding errors.
* Following the recent upgrade to webauthn there was a change in the way
the library expects RPOrigins to be configured. This leads to the
Relying Party Origin not being configured and prevents registration.
Fix#22507
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
#21937 implemented only basic events based on name because of `act`'s
limitation. So I sent a PR to parse all possible events details in
https://gitea.com/gitea/act/pulls/11 and it merged. The ref
documentation is
https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows
This PR depends on that and make more detail responses for `push` events
and `pull_request` events. And it lefts more events there for future
PRs.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fixes#22628
This PR adds cross references for commits by using the format
`owner/repo@commit` . References are rendered like
[go-gitea/lgtm@6fe88302](#dummy).
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR just consumes the
[hcaptcha](https://gitea.com/jolheiser/hcaptcha) and
[haveibeenpwned](https://gitea.com/jolheiser/pwn) modules directly into
Gitea.
Also let this serve as a notice that I'm fine with transferring my
license (which was already MIT) from my own name to "The Gitea Authors".
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The code for checking if a commit has caused a change in a PR is
extremely inefficient and affects the head repository instead of using a
temporary repository.
This PR therefore makes several significant improvements:
* A temporary repo like that used in merging.
* The diff code is then significant improved to use a three-way diff
instead of comparing diffs (possibly binary) line-by-line - in memory...
Ref #22578
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adding the related comment to the issue and pull request status change
in the UI notifications allows to navigate directly to the specific
event in its dedicated view, easing the reading of last comments and to
the editor for additional comments if desired.
This adds a yaml attribute that will allow the option for when markdown
is rendered that the title will be not included in the output
Based on work from @brechtvl
The `commit_id` property name is the same as equivalent functionality in
GitHub. If the action was not caused by a commit, an empty string is
used.
This can for example be used to automatically add a Resolved label to an
issue fixed by a commit, or clear it when the issue is reopened.
This commit adds support for specifying comment types when importing
with `gitea restore-repo`. It makes it possible to import issue changes,
such as "title changed" or "assigned user changed".
An earlier version of this pull request was made by Matti Ranta, in
https://future.projects.blender.org/blender-migration/gitea-bf/pulls/3
There are two changes with regard to Matti's original code:
1. The comment type was an `int64` in Matti's code, and is now using a
string. This makes it possible to use `comment_type: title`, which is
more reliable and future-proof than an index into an internal list in
the Gitea Go code.
2. Matti's code also had support for including labels, but in a way that
would require knowing the database ID of the labels before the import
even starts, which is impossible. This can be solved by using label
names instead of IDs; for simplicity I I left that out of this PR.
This PR adds a task to the cron service to allow garbage collection of
LFS meta objects. As repositories may have a large number of
LFSMetaObjects, an updated column is added to this table and it is used
to perform a generational GC to attempt to reduce the amount of work.
(There may need to be a bit more work here but this is probably enough
for the moment.)
Fix#7045
Signed-off-by: Andrew Thornton <art27@cantab.net>
As suggest by Go developers, use `filepath.WalkDir` instead of
`filepath.Walk` because [*Walk is less efficient than WalkDir,
introduced in Go 1.16, which avoids calling `os.Lstat` on every file or
directory visited](https://pkg.go.dev/path/filepath#Walk).
This proposition address that, in a similar way as
https://github.com/go-gitea/gitea/pull/22392 did.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR introduce glob match for protected branch name. The separator is
`/` and you can use `*` matching non-separator chars and use `**` across
separator.
It also supports input an exist or non-exist branch name as matching
condition and branch name condition has high priority than glob rule.
Should fix#2529 and #15705
screenshots
<img width="1160" alt="image"
src="https://user-images.githubusercontent.com/81045/205651179-ebb5492a-4ade-4bb4-a13c-965e8c927063.png">
Co-authored-by: zeripath <art27@cantab.net>
closes#13585fixes#9067fixes#2386
ref #6226
ref #6219fixes#745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When using an external renderer, STDOUT is expected to be HTML. But
anything written to STDERR is currently ignored. In cases where the
renderer fails, I would like to log any error messages that the external
program outputs to STDERR.
Fix#22386
`GetDirectorySize` moved as `getDirectorySize` because it becomes a
special function which should not be put in `util`.
Co-authored-by: Jason Song <i@wolfogre.com>
- Move the file `compare.go` and `slice.go` to `slice.go`.
- Fix `ExistsInSlice`, it's buggy
- It uses `sort.Search`, so it assumes that the input slice is sorted.
- It passes `func(i int) bool { return slice[i] == target })` to
`sort.Search`, that's incorrect, check the doc of `sort.Search`.
- Conbine `IsInt64InSlice(int64, []int64)` and `ExistsInSlice(string,
[]string)` to `SliceContains[T]([]T, T)`.
- Conbine `IsSliceInt64Eq([]int64, []int64)` and `IsEqualSlice([]string,
[]string)` to `SliceSortedEqual[T]([]T, T)`.
- Add `SliceEqual[T]([]T, T)` as a distinction from
`SliceSortedEqual[T]([]T, T)`.
- Redesign `RemoveIDFromList([]int64, int64) ([]int64, bool)` to
`SliceRemoveAll[T]([]T, T) []T`.
- Add `SliceContainsFunc[T]([]T, func(T) bool)` and
`SliceRemoveAllFunc[T]([]T, func(T) bool)` for general use.
- Add comments to explain why not `golang.org/x/exp/slices`.
- Add unit tests.
After #22362, we can feel free to use transactions without
`db.DefaultContext`.
And there are still lots of models using `db.DefaultContext`, I think we
should refactor them carefully and one by one.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea emoji dataset was out of date because it gets manually built and
hasn't been rebuilt since it was added. This means Gitea doesn't
recognize some newer emoji or changes to existing ones.
After changing the max unicode version to 14 I just ran: `go run
build/generate-emoji.go`
This should address the initial issue seen in #22153 where Gitea doesn't
recognize a standard alias used elsewhere when importing content.
14 is the latest supported version from the upstream source as 15 is not
widely supported (in their opinion) yet
A drawback is the previous generated template has been cached, so you
cannot get error in the UI but only from log
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: delvh <dev.lh@web.de>
- Unify the hashing code for repository and user avatars into a
function.
- Use a sane hash function instead of MD5.
- Only require hashing once instead of twice(w.r.t. hashing for user
avatar).
- Improve the comment for the hashing code of why it works.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Fix#22281
In #21621 , `Get[V]` and `Set[V]` has been introduced, so that cache
value will be `*Setting`. For memory cache it's OK. But for redis cache,
it can only store `string` for the current implementation. This PR
revert some of changes of that and just store or return a `string` for
system setting.
Previously, there was an `import services/webhooks` inside
`modules/notification/webhook`.
This import was removed (after fighting against many import cycles).
Additionally, `modules/notification/webhook` was moved to
`modules/webhook`,
and a few structs/constants were extracted from `models/webhooks` to
`modules/webhook`.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
#18058 made a mistake. The disableGravatar's default value depends on
`OfflineMode`. If it's `true`, then `disableGravatar` is true, otherwise
it's `false`. But not opposite.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Push mirrors `sync_on_commit` option was added to the web interface in
v1.18.0. However, it's not added to the API. This PR updates the API
endpoint.
Fixes#22267
Also, I think this should be backported to 1.18
There are a few places in FlushQueueWithContext which make an incorrect
assumption about how `select` on multiple channels works.
The problem is best expressed by looking at the following example:
```go
package main
import "fmt"
func main() {
closedChan := make(chan struct{})
close(closedChan)
toClose := make(chan struct{})
count := 0
for {
select {
case <-closedChan:
count++
fmt.Println(count)
if count == 2 {
close(toClose)
}
case <-toClose:
return
}
}
}
```
This PR double-checks that the contexts are closed outside of checking
if there is data in the dataChan. It also rationalises the WorkerPool
FlushWithContext because the previous implementation failed to handle
pausing correctly. This will probably fix the underlying problem in
#22145Fix#22145
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR changed the Auth interface signature from
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) *user_model.User`
to
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) (*user_model.User, error)`.
There is a new return argument `error` which means the verification
condition matched but verify process failed, we should stop the auth
process.
Before this PR, when return a `nil` user, we don't know the reason why
it returned `nil`. If the match condition is not satisfied or it
verified failure? For these two different results, we should have
different handler. If the match condition is not satisfied, we should
try next auth method and if there is no more auth method, it's an
anonymous user. If the condition matched but verify failed, the auth
process should be stop and return immediately.
This will fix#20563
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Jason Song <i@wolfogre.com>
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Since #20218 introduced internal watching template, template watching
should be removed from `air`. This will prevent restart the whole server
once the template files changed to speed up developing when using `make
watch`.
To ensure `make watch` will reuse template watching, this PR introduced
a new ENV `GITEA_RUN_MODE` to make sure `make watch` will always run in
a dev mode of Gitea so that template watching will open.
This PR also added more exclude testdata directories.
- Remove code that isn't being used.
Found this is my stash from a few weeks ago, not sure how I found this
in the first place.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes#22178
After this change upload versions with different semver metadata are
treated as the same version and trigger a duplicated version error.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
For a long time Gitea has tested PR patches using a git apply --check
method, and in fact prior to the introduction of a read-tree assisted
three-way merge in #18004, this was the only way of checking patches.
Since #18004, the git apply --check method has been a fallback method,
only used when the read-tree three-way merge method has detected a
conflict. The read-tree assisted three-way merge method is much faster
and less resource intensive method of detecting conflicts. #18004 kept
the git apply method around because it was thought possible that this
fallback might be able to rectify conflicts that the read-tree three-way
merge detected. I am not certain if this could ever be the case.
Given the uncertainty here and the now relative stability of the
read-tree method - this PR makes using this fallback optional and
disables it by default. The hope is that users will not notice any
significant difference in conflict detection and we will be able to
remove the git apply fallback in future, and/or improve the read-tree
three-way merge method to catch any conflicts that git apply method
might have been able to fix.
An additional benefit is that patch checking should be significantly
less resource intensive and much quicker.
(See
https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737)
Ref #22083
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The PR #21198 introduced a probable security vulnerability which
resulted in making all storage files be marked as executable.
This PR ensures that these are forcibly marked as non-executable.
Fix#22161
Signed-off-by: Andrew Thornton <art27@cantab.net>
As recognised in #21841 the rendering of plain text files is somewhat
incorrect when there are ambiguous characters as the html code is double
escaped. In fact there are several more problems here.
We have a residual isRenderedHTML which is actually simply escaping the
file - not rendering it. This is badly named and gives the wrong
impression.
There is also unusual behaviour whether the file is called a Readme or
not and there is no way to get to the source code if the file is called
README.
In reality what should happen is different depending on whether the file
is being rendered a README at the bottom of the directory view or not.
1. If it is rendered as a README on a directory - it should simply be
escaped and rendered as `<pre>` text.
2. If it is rendered as a file then it should be rendered as source
code.
This PR therefore does:
1. Rename IsRenderedHTML to IsPlainText
2. Readme files rendered at the bottom of the directory are rendered
without line numbers
3. Otherwise plain text files are rendered as source code.
Replace #21841
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The recent PR adding orphaned checks to the LFS storage is not
sufficient to completely GC LFS, as it is possible for LFSMetaObjects to
remain associated with repos but still need to be garbage collected.
Imagine a situation where a branch is uploaded containing LFS files but
that branch is later completely deleted. The LFSMetaObjects will remain
associated with the Repository but the Repository will no longer contain
any pointers to the object.
This PR adds a second doctor command to perform a full GC.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea will attempt to lookup its location using LookPath however, this
fails on cmd.exe if gitea is in the current working directory.
exec.LookPath will return an exec.ErrDot error which we can test for and
then simply using filepath.Abs(os.Args[0]) to absolute gitea against the
current working directory.
Fix#22063
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Close#14601Fix#3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
Although there are per-locale fallbacks for ambiguity the locale names
for Chinese do not quite match our locales. This PR simply maps zh-CN on
to zh-hans and other zh variants on to zh-hant.
Ref #20999
Signed-off-by: Andrew Thornton <art27@cantab.net>
When getting tracked times out of the db and loading their attributes
handle not exist errors in a nicer way. (Also prevent an NPE.)
Fix#22006
Signed-off-by: Andrew Thornton <art27@cantab.net>
Paths in git are always separated by `/` not `\` - therefore we should
`path` and not `filepath`
Fix#21987
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Provide a new type to make it easier to parse a ref name.
Actually, it's picked up from #21937, to make the origin PR lighter.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A complement to #21985.
I overlooked it because the name of the switch is `StartServer`, not
`Enabled`. I believe the weird name is a legacy, but renaming is out of
scope.
Fixes#21865.
Scheme-based normalization ([RFC 3986, section
6.2.3](https://www.rfc-editor.org/rfc/rfc3986#section-6.2.3)) was
already implemented, but only for `defaultAppURL`.
This PR implements the same for `AppURL`.
Signed-off-by: Saswat Padhi <saswatpadhi@protonmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
`hex.EncodeToString` has better performance than `fmt.Sprintf("%x",
[]byte)`, we should use it as much as possible.
I'm not an extreme fan of performance, so I think there are some
exceptions:
- `fmt.Sprintf("%x", func(...)[N]byte())`
- We can't slice the function return value directly, and it's not worth
adding lines.
```diff
func A()[20]byte { ... }
- a := fmt.Sprintf("%x", A())
- a := hex.EncodeToString(A()[:]) // invalid
+ tmp := A()
+ a := hex.EncodeToString(tmp[:])
```
- `fmt.Sprintf("%X", []byte)`
- `strings.ToUpper(hex.EncodeToString(bytes))` has even worse
performance.
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR addresses #19586
I added a mutex to the upload version creation which will prevent the
push errors when two requests try to create these database entries. I'm
not sure if this should be the final solution for this problem.
I added a workaround to allow a reupload of missing blobs. Normally a
reupload is skipped because the database knows the blob is already
present. The workaround checks if the blob exists on the file system.
This should not be needed anymore with the above fix so I marked this
code to be removed with Gitea v1.20.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
