as we're approaching from the last node, if we're scrolled up,
the first node we encounter would be below the bottom of the viewport
change the logic to stop at the first node that has its top
above the viewport bottom.
When completely scrolled up, this was causing nodes way below
the viewport to be selected as the reference for the pixelOffset,
and when pagination came in, it would immediately try to apply
the big negative pixelOffset, scrolling to a negative scrollTop,
thus going to the top again, and triggering another pagination,
entering in an infinite pagination loop until you scrolled down.
this is not nearly as smooth as using ResizeObserver, as the
callback rate is a lot lower, but seems to be quite a bit better
than what we have right now, without the 7% cpu hog that
the requestAnimationFrame polling fallback has.
before we would clear it as soon as you were 1px away from
the bottom of the timeline, which would still create jumping as
the whitespace would around 36px. To play it safe, we only clear it
after moving 200px from the bottom.
Also include "local echo" scroll events, caused by setting scrollTop
The fallthrough for `notifier_enabled` caused a NPE on `payload.error`, so this moves the fallthrough to where it is intended and sanity checks `payload.error` for next time.
The initial phase of registration can differ by the default server type. In
particular, the Matrix.org HS type wants to skip to the registration form.
Fixes https://github.com/vector-im/riot-web/issues/8862
If Riot has been configured with a `default_hs_url` (or `default_server_name`,
which then sets a default HS URL), then skip the server details on registration
by default.
Fixes https://github.com/vector-im/riot-web/issues/8840
This passes the validity state of all fields to the consumer of
`RegistrationForm` via the `onValdiationChange` callback, instead of just the
most recent error.
In addition, we notify the consumer for any validation change, whether success
or failure. This allows old validation messages to be properly cleared. It also
allows the consumer to be aware of multiple validation errors and display the
next one after you have fixed the first.
Fixes https://github.com/vector-im/riot-web/issues/8769
Now that auth flows can show a server name like `example.com` which might
delegate the HS to some other server, it could be confusing to see text like
"Sign in to example.com", especially if `example.com` runs an identity service,
uses SSO, has its own account system, or other things like this.
To clarify that we mean Matrix accounts, all auth flows are updated to talk in
terms of "<verb> your Matrix account on <server>".
Fixes part of
https://github.com/vector-im/riot-web/issues/8763#issuecomment-464823909.
If a default server name is set and the current HS URL is the default HS URL,
we'll display that name in the "your account" text on the forgot password form.
This can be a bit more user friendly, especially when the HS is delegated to
somewhere such as Modular, since you'll then see "example.com" instead of
"example.modular.im", which you have no direct relationship with as a user.
This is the key bit of https://github.com/vector-im/riot-web/issues/8763 for
forgot password.
If a default server name is set and the current HS URL is the default HS URL,
we'll display that name in the "sign in to" text on the login form.
This can be a bit more user friendly, especially when the HS is delegated to
somewhere such as Modular, since you'll then see "example.com" instead of
"example.modular.im", which you have no direct relationship with as a user.
This is the key bit of https://github.com/vector-im/riot-web/issues/8763 for
login.
If a default server name is set and the current HS URL is the default HS URL,
we'll display that name in the "your account" text on the registration form.
This can be a bit more user friendly, especially when the HS is delegated to
somewhere such as Modular, since you'll then see "example.com" instead of
"example.modular.im", which you have no direct relationship with as a user.
This is the key bit of https://github.com/vector-im/riot-web/issues/8763 for
registration.
Adds a UserView that contains a MainSplit with an empty div
and a RightPanel, preset to the given member.
UserView fetches the profile and creates a fake member, which
it passed on to the RightPanel.
this doesn't use the view_user action on purpose, to avoid any
interference of the UserView when trying to view a room member.
`ServerTypeSelector` would call its `onChange` prop both at construction
(because it computed the default selected type and consumers might want to know)
as well as on actual user change. This ended up complicating consumer code, as
they want to differentiate between initial state and changes made by the user.
To simplify things, `ServerTypeSelector` now exports a function to compute the
server type from HS URL, which can be useful for setting its initially selected
type. The consumer now provides that type via a prop, and `onChange` is now only
called for actual user changes, simplifying the logic in `Registration` which
uses `ServerTypeSelector`.
In addition, some usages of `customHsUrl` vs. `defaultHsUrl` in `Registration`
are simplified to be `customHsUrl` only (since it already includes a fallback to
the default URL in `MatrixChat`).
We weren't correctly jumping into the appropriate bit of the registration
flow when coming in from an email link.
* If we have client secret / sessionId, go straight to registration phase
* Don't reset server URLs when the server type component tells us its
initial value
* Confusingly, pass the custom server URL as 'default server URL' to
the custom server type, as this is what we want the inital section
to be based on.
Fixes https://github.com/vector-im/riot-web/issues/8490
This takes out the old user and room settings, replacing the paths with the new dialog editions. The labs setting has been removed in order to support this change.
In addition to removing the old components outright, some older components which were only used by the settings pages have been removed. The exception is the ColorSettings component as it has a high chance of sticking around in the future.
Styles that were shared by the settings components have been broken out to dedicated sections, making it easier to remove the old styles entirely.
Some stability testing of the app has been performed to ensure the app still works, however given the scope of this change there is a possibility of some broken functionality.
This is intentionally not removing the labs flag or other supporting structures of the old settings to make a revert as easy as possible in the event that needs to happen. All of the cruft left behind (TempTab, temp styles, labs flag, old components, etc) will be removed in the very near future.
by updating prop through the dispatcher instead of
having it's own state that is OR'ed in.
before the state couldn't override the prop and you couldn't
expand the left panel anymore when MatrixChat
decided your viewport was too narrow
this was caused by the layout growing wider than it could,
hence the overflow event being triggered.
The overflow event is only supported in FF and we fire the
manual check often enough that the overflow gradient still
reliably (dis)appears when needed.
This lessens the warning for unstable-but-not-official versions while still communicating that the version is unstable. In the future, we may want to make this state dismissable.
Fixes https://github.com/vector-im/riot-web/issues/6435
This is done through an on-the-fly inverter for the settings. All the settings changed are boolean values, so this should be more than safe to just let happen throughout the SettingsStore. Typically a change like this would be done in the individual handlers (similar to how setting names are remapped to different properties or even different storage locations on the fly), however doing that for this many settings would be a huge nightmare and involve changing *all* the layers. By putting a global "invert this" flag on the setting, we can get away with doing the inversion as the last possible step during a read (or write).
To speed up calculations of the default values, we cache all the inverted values into a lookup table similar to how we represent the defaults already. Without this, the DefaultHandler would need to iterate the setting list and invert the values, slowing things down over time. We invert the value up front so we can keep the generic inversion logic without checking the level ahead of time. It is fully intended that a default value represents the new setting name, not the legacy name.
This commit also includes a debugger for settings because it was hard to visualize what the SettingsStore was doing during development. Some added information is included as it may be helpful for when someone has a problem with their settings and we need to debug it. Typically the debugger would be run in conjunction with `mxSendRageshake`: `mxSettingsStore.debugSetting('showJoinLeaves') && mxSendRageshake('Debugging showJoinLeaves setting')`.
Also bring in the compact timeline option.
Without minor CSS changes, the old user settings are completely unusable with this change. As such, minimal effort has been put in to have it be useful. Similarly, the changes drop the use of radio groups and the old theme selector was the only one that used it. See the comments for more details on how/why this was mitigated the way it was.
This changes the auth screens to use the modal-like style of the redesign.
This does not attempt to style the actual body content of each screen. Instead,
it covers the header area with logo, footer links, and overall modal container
only.
This component displays login and register buttons. It's currently used in the
composer when viewing a room as a guest.
The name is confusing because the login flow uses are very similarly named
`mx_Login_box` as a wrapping around forms, which is totally different than these
buttons.
Additionally, the components is moved to `views/auth` since it is very simple
and auth related.
This allows Webpack to insert the proper image URL after builds steps like
adding a hash and so on. The path you supply to `require` is relative to the JS
source file, just like any other would be.
Split the 'new recovery method' into two cases: one where the new
recovery method isn't trusted and you need to verify the device, and
another where it is and the client is using it (where it's more of
an FYI).
https://github.com/vector-im/riot-web/issues/8069
The "New Recovery Method" dialog would show if either the recovery method had
been changed or removed, but the dialog text didn't make much sense for the
removed case.
This adds a separate dialog customized for the removed case.
Fixes https://github.com/vector-im/riot-web/issues/8046.
* Put a cancel button on the first page of the create key backup
dialog
* Move settings logic into the room reminder: I know this is moving
logic *into* a view but RoomView is quite heavyweight as it is.
* Give the recovery reminder an explicit 'onDontAskAgainSet' rather
than onFinished which was getting called with false when the last
screen of the dialog was closed with the cancel 'x' rather than
the 'close' button.
https://github.com/vector-im/riot-web/issues/8066
All of the anchors were pointed at `#` which, when clicked, would trigger a hash change in the browser. This change races the change made by the screen handling where the screen handling ends up losing. Because the hash is then tracked as empty rather than `#/login` (for example), the state machine considers future changes as no-ops and doesn't do anything with them.
By using `preventDefault` and `stopPropagation` on the anchor click events, we prevent the browser from automatically going to an empty hash, which then means the screen handling isn't racing the browser, and the hash change state machine doesn't no-op.
After applying that fix, going between pages worked great unless you were going from /login to /home. This is because the MatrixChat state machine was now out of sync (a `view` of `LOGIN` but a `page` of `HomePage` - an invalid state). All we have to do here is ensure the right view is used when navigating to the homepage.
Fixes https://github.com/vector-im/riot-web/issues/4061
Note: the concerns in 4061 about logging out upon entering the view appear to have been solved. Navigating to the login page doesn't obliterate your session, at least in my testing.
All of the anchors were pointed at `#` which, when clicked, would trigger a hash change in the browser. This change races the change made by the screen handling where the screen handling ends up losing. Because the hash is then tracked as empty rather than `#/login` (for example), the state machine considers future changes as no-ops and doesn't do anything with them.
By using `preventDefault` and `stopPropagation` on the anchor click events, we prevent the browser from automatically going to an empty hash, which then means the screen handling isn't racing the browser, and the hash change state machine doesn't no-op.
After applying that fix, going between pages worked great unless you were going from /login to /home. This is because the MatrixChat state machine was now out of sync (a `view` of `LOGIN` but a `page` of `HomePage` - an invalid state). All we have to do here is ensure the right view is used when navigating to the homepage.
Fixes https://github.com/vector-im/riot-web/issues/4061
Note: the concerns in 4061 about logging out upon entering the view appear to have been solved. Navigating to the login page doesn't obliterate your session, at least in my testing.
If the current device hasn't verified the device that created the account's
current key backup version, then the current device is won't use the key backup.
This change adjusts an existing in-room reminder to do the right thing for this
case by allowing the user to verify the device that created the key backup.
Fixesvector-im/riot-web#7902.
The classes on the search box input were changed without updating the focusing
loop in the room filter which used one of these classes as a boundary condition.
This led to a case that could loop forever.
Regressed by #2267.
Fixesvector-im/riot-web#7926.
the overflow/underflow events are not always reliable in nooverlay
browsers (FF), so forward the checkOverflow call we need anyway
for the scroll indicator gradients to see if we need to do the
margin trick for the on-hover scrollbar we use in nooverlay browsers.
this fixes on hover jumping in a subroomlist
Adds a New Recovery Method dialog which is shown when key backup fails because
of a version mismatch / version not found error.
The set up button in the dialog currently only marks a device as verified (via a
verification prompt) instead of the eventual restore and cross-sign flow, since
those pieces don't exist yet.
Signed-off-by: J. Ryan Stinnett <jryans@gmail.com>
